Campy Mirage 10 speed shifters

Page may contain affiliate links. Please see terms for details.

stephec

Legendary Member
Location
Bolton
Might depend on what exact model/age they are.
 

PpPete

Legendary Member
Location
Chandler's Ford
You may be pulling back the wrong bit of the hood.
Not the same model but on my Campag bikes (all Ultrashift 10s - now sadly no longer available) the wire goes in from the bottom
 

Smokin Joe

Legendary Member
Peel back the hoods, on the inside edge of the shifter is the little hole where the cable threads through from underneath.

Dead easy, I found Shimano concealed cables a real pain in the butt by comparison.
 
Peel back the hoods, on the inside edge of the shifter is the little hole where the cable threads through from underneath.

Dead easy, I found Shimano concealed cables a real pain in the butt by comparison.
Smokin Joe, that was a smokin hot answer. Job sorted. Thanks. The previous owner had concealed it with the bar tape and found it after pulling it all back
 
Top Bottom