Newbie with a question

Page may contain affiliate links. Please see terms for details.
It's overpriced and heavy
You can build your own much cheaper and to a better spec
 

Nihal

Veteran
:welcome: to this weird place Snowysdad:hello:.I'm not good at giving advice about buying bikes,but it looks good.Just wait for the fixie professionals and they'll give you some good advice.And :welcome:again.And yes the price is................
 
OP
OP
snowysdad

snowysdad

Active Member
Thanks so far guys for the replies, some more info:

I get the whole, "build your own" thing, but I would rather not at this early stage. I also want something with bull horn type handlebars.

Thanks so far :smile:

SD
 

Nihal

Veteran
Thanks so far guys for the replies, some more info:

I get the whole, "build your own" thing, but I would rather not at this early stage. I also want something with bull horn type handlebars.
Bull horn type handlebars as in these
han.jpg

You could get a good fixie bike with straight bars and buy bar ends.But actually,Drops are more comfortable and give variations for positioning.Keeping your hand in one single position while riding will cause pain after some time.Using these handlebars above is not quiet good as they cause a lot of instability and you don't have your brake levers close enough.:thumbsup:

+what type of bike do you want.....Road,MTB or Hybrid(handlebars varies with each type)
 

Nihal

Veteran
Then i would say Drops are more comfortable,but the again that preference varies from person to person:smile:
 
OP
OP
snowysdad

snowysdad

Active Member
I am also looking at a Specialized Langster which, yes has drops....any views on this bike?

Many thanks
 

edindave

Über Member
Location
Auld Reeker
I'm looking at a first SS bike purchase and I think the Langster Steel looks good, seems to be well reviewed and I've heard it holds its value.
It's in a similar price bracket as the Charge Plug which you haven't mentioned but might be worth a look if you haven't already considered it. As for drop bars, I'm leaning more towards bull horns for the main reason that on my road bike I spend 99% of the time on the hoods.
 

TheDoctor

Noble and true, with a heart of steel
Moderator
Location
The TerrorVortex
That Cooper bike is well overpriced IMHO.
I'd go with a Langster, Charge Plug or Giant Bowery, or even a Viking.
In fact, for over £700 I'd get the Viking, chuck a £10 set of bar ends on and spend the remaining £500+ on going on holiday on it.
 

biggs682

Itching to get back on my bike's
Location
Northamptonshire
snowysdad where are you based in the country ?

just go and pick up a decent 2nd hand 80's racer bike and frame with horizontal dropouts and wheel it to lbs and ask them to take rear cog set off and re dish the wheel along with a bmx single speed gear and hey presto for about £60 you have a single speed bike , i am on my 4th or 5th similar build great fun .

you could do same for a fixie but just keep an eye out for a flip flop hub then you can run either
 
Location
Edinburgh
Not that I am biased, but I would also recommend the Pearson Touche. Mind you it has got a bit pricier than when I bought mine and I don't like the revised paint job with the white bit.
 

mangid

Guru
Location
Cambridge
I am also looking at a Specialized Langster which, yes has drops....any views on this bike?

Many thanks

Which one, aluminium or steel?

I've got a 2007 aluminum Langster, the frame is still original and has 35k miles on it. Everything else bit the dust many miles ago. First frame was replaced for free by Specialised, the 2006 didn't have steel plates to protect the soft aluminum dropouts. The wheels but the dust pretty quickly, they're just ball bearings and a winter of rain snow slush saw to them pretty quickly. Other bits I've simply upgraded over time.
 
Top Bottom