Road forks for a 501 frame

Page may contain affiliate links. Please see terms for details.

uphillstruggler

Legendary Member
Location
Half way there
Hello All

I am currently trying to breathe life into the frame shown in the picture.

IMAG1813.jpg

its had a bit of a life and been well used. I was given the frame and forks by a mate after he was knocked off it by a smidsy.

there is a bit of welding needed and the stem is stuck - which is why the new forks are necessary - my mate tried to get it out with a very large adjustable and a set of very large grips and has bent (and most likely worse) the forks.

it is currently at a local engineers to be brazed, has been stripped down to the metal ready for a spray (as long as the brazing takes) and to be re used.

Long story short - what have you got at the back of your shed and how much do you want for them. colour unimportant as I will likely strip them down and finish them same as the frame.

Edit: or swap, I have a few bits and pieces that can be exchanged - bib longs, a saddle, a tyre or two - lets barter for a laugh!

thanks for reading
 
Top Bottom