To Peelaway or not to Peelaway, that is the question...

Page may contain affiliate links. Please see terms for details.

swee'pea99

Legendary Member
Plan A, in trying to retrieve my bay window...

1684939270145.png


...has always been to start off with Peelaway, which did such a cracking job on the mouldings in the hall:

1684939411033.png


Now, though, when I'm finally able to take a proper look at it, I'm a tad concerned about what might actually lie beneath 150 years of paint. It all looks a bit....crumbly?

1684939520543.png



1684939555704.png


These houses were thrown up in the mid-late 1800s very much to a budget, and it wouldn't be the first evidence of cheap, low grade materials I've bumped into over the last 20 years.

I really don't know now whether doing the peelaway might just introduce me to a world of pain, and whether it might actually be more sensible to just do a bit of basic sanding of the loosest and worst sections, then slap on a couple of new coats of Mr Dulux's finest, accepting that it's never going to be perfect.

Any thoughts? Especially related experiences. Thanks in anticipation.
 

sleuthey

Legendary Member
1 scrape loose bits
2 wire brush partially loose bits
3 sand stubborn bits
4 paint
 

Beebo

Firm and Fruity
Location
Hexleybeef
They look like they have been filled before.
I would do as above but maybe fill the worst areas to stop water penetration.
 
OP
OP
swee'pea99

swee'pea99

Legendary Member
So stripping back to the stone not favoured?

When you say fill the worst areas...you mean with polyfilla, sort of thing?

(Have to admit I worry that once I start scraping the whole lot will just crumble :surrender:)
 
Top Bottom