Amount of grease on hub sleeve

Page may contain affiliate links. Please see terms for details.

loz

Veteran
Location
Tunbridge Wells
I recently decided to replace the cartridge bearings on my rear campag mirage hub. Once disassembled I gave it all a good clean. I've now replaced the bearings and am reassembling. The problem is that I cannot remember how much grease was originally used on the sleeve marked as "D" in the image below. Should it be packed or just a light covering?

Thanks!

hub.png
 
Location
Loch side.
Just a light covering, if any. Just handlilng it with greasy hands is enough. It is a spacer and has not moving parts working against it.
 
Top Bottom