Canyon's stealth colour

Page may contain affiliate links. Please see terms for details.

DSK

Senior Member
Most 'stealth' bikes regardless of brand are always matt black, black, dark grey or any mix of those three.
 

DSK

Senior Member
Matt can be cleaned but needs more attention than normal paint to preserve it and keep the matt effect looking its best.

Each to their own but, I personally avoid dark colours as IMO, such bikes are generally harder to spot and matt finishes are not my thing.
 
OP
OP
Welsh wheels

Welsh wheels

Lycra king
Location
South Wales
Matt can be cleaned but needs more attention than normal paint to preserve it and keep the matt effect looking its best.

Each to their own but, I personally avoid dark colours as IMO, such bikes are generally harder to spot and matt finishes are not my thing.
Agreed, I initially wanted matt black but after thinking about decided to go for red.
 
  • Like
Reactions: DSK

vickster

Squire
Agreed, I initially wanted matt black but after thinking about decided to go for red.
Good plan...everyone knows red bikes are faster :whistle:
 

Milkfloat

An Peanut
Location
Midlands
I have a matt black frame on one of my bikes, I would not do it again, but it was really cheap. Luckily it is a winter bike, so cleanliness is of secondary consideration.
 

Mark pallister

Senior Member
What’s the problem with Matt black ? I wash it exac the same way as my other bikes
it doesn’t take anymore looking after than any other bike
and every one knows black is the new red
536463
 

DSK

Senior Member
Nothing is wrong with Matt.

With regards to washing, its easier to damage matt finishes with incorrect washing techniques and the repair of which, is harder than their glossy counter parts.

Its essential to thoroughly remove all loose dirt, prior to washing with products that ideally do not contain gloss enhancers (without using high water pressure). A suitable protection product for matt finishes will also be required where it better suits the the matt surface to give it the finishing look as it came from the factory.

Very few people I know bother cleaning/detailing their bike properly and a failure to do will mean deteriorating the original finish.
 

Mark pallister

Senior Member
Nothing is wrong with Matt.

With regards to washing, its easier to damage matt finishes with incorrect washing techniques and the repair of which, is harder than their glossy counter parts.

Its essential to thoroughly remove all loose dirt, prior to washing with products that ideally do not contain gloss enhancers (without using high water pressure). A suitable protection product for matt finishes will also be required where it better suits the the matt surface to give it the finishing look as it came from the factory.

Very few people I know bother cleaning/detailing their bike properly and a failure to do will mean deteriorating the original finish.
I use fairy liquid,bikes 3 yr old 12000 plus miles and looks as good as new
 
Top Bottom