chains

[shumidrives]

to fit a new chain do you have to have a split link or is there a way to fit itt without one???

 

[GilesM]

If it hasn't got a split link, you'll need one of these:

http://www.chainreactioncycles.com/Models.aspx?ModelID=7843

Although if it's a bike with derailleur gears it won't be called a split link it will be a power link (for an SRAM chain) and it will look like this:

http://www.chainreactioncycles.com/Models.aspx?ModelID=871

I hope this helps.

 

[shumidrives]

so if i get a chain tool i will be able to fit a new chain without a split link/power link???

how do i do this??

 

[Oldlegs]

You will need a chain tool to cut a new chain to size - they come with a few extra links so they will fit any geometry.

Shimano chains join with a special non re-usable pin for which you need a chain tool. You get one pin with a new chain.

SRAM and others use a power link (does'nt need a chain tool) and again you get one with a new chain.

 

[accountantpete]

There are a few videos on you tube - heres one

View: http://www.youtube.com/watch?v=NVYV4WsYuVM


The tricky part is ensuring that the link moves freely afterwards at the joint.

I would add that I have been sold a couple of absolute pieces of cheese called "chain tools" - get the basic Park tool as in Giles' first link as it is made strong enough for the job and then practice on a spare chain if you have one.

 

[SimonC]

There are a few videos on you tube - heres one

View: http://www.youtube.com/watch?v=NVYV4WsYuVM


The tricky part is ensuring that the link moves freely afterwards at the joint.

I would add that I have been sold a couple of absolute pieces of cheese called "chain tools" - get the basic Park tool as in Giles' first link as it is made strong enough for the job and then practice on a spare chain if you have one.

Bend the chain at 90 degrees to the way its supposed to bend, frees up stiff links.