Crank removal

[Audiotek303]

Hi there, Can anyone tell me what thread size crank removal tool do I need to remove the crank arms from a Peugeot Carbolite 103 year 1985?

 

[Cycleops]

If it's a UK model should be the standard removal tool. Don't think it varied for French cranksets either.

 

[Ian H]

TA and Stronglight both had their own removers in years gone by. If the current universal one doesn't fit then it'll be one of those two. I do have some somewhere, but you might not be nearby.

 

[Paulus]

Hi there, Can anyone tell me what thread size crank removal tool do I need to remove the crank arms from a Peugeot Carbolite 103 year 1985?

View attachment 670221

I used to have one of these Pugs.
A standard crank remover did the job.

 

[Audiotek303]

I measured the width size of the thread and it measured 21mm, but don't think there's a puller in that size, so I decided to post it here

 

[Audiotek303]

Also measured the plug width and that measured 21mm too

 

[Paulus]

Also measured the plug width and that measured 21mm too

Ho there @Audiotek303 .
What make is the crankset, that will help with the crankpuller that is needed.

 

[goldcoastjon]

I used to have one of these Pugs.
A standard crank remover did the job.

Try a 22mm (Campi-type) remover. if it threads on easily, you're good to go...

 

[Smokin Joe]

Ho there @Audiotek303 .
What make is the crankset, that will help with the crankpuller that is needed.

I had one of those, I believe it is Peugeot's own cheapo crankset. If you look the rings are fixed and not removeable.

 

[Audiotek303]

I had one of those, I believe it is Peugeot's own cheapo crankset. If you look the rings are fixed and not removeable.

Yes very true, all fixed.
Just trying to put some smaller rings on it, pretty hilly where I live. Groupset is Simplex

 

[Audiotek303]

Ho there @Audiotek303 .
What make is the crankset, that will help with the crankpuller that is needed.

Crankset is Simplex, I will try to hunt one down if I can