Deda Stems

[fixedfixer]

Bit of a clear out. No longer have Deda bars so these are surplus to requirements. For some reason I bought a couple of these black ones - it looks like it says LOGO on the side so assume that's the model. I never fitted them. Both are as new in their boxes with the instruction leaflets. One is 80mm and the other is 100mm Looking for £10 posted (each).



The third one was fitted, has some fading of the decal on one side. Think it's the Quattro model. That's 110mm I think. £8 posted.

 

[vickster]

@LibraRider might find the 80mm one useful if it fits 31.8mm bars

 

[fixedfixer]

Cheers vickster - I'll await @LibraRider response.

 

[vickster]

Cheers vickster - I'll await @LibraRider response.

You might want to add the diameter too though

 

[fixedfixer]

Assumed all Deda were some odd size Looks like I'll need to get the verner out.

That'll be a job for later if folks are interested.

 

[vickster]

Assumed all Deda were some odd size Looks like I'll need to get the verner out.

That'll be a job for later if folks are interested.

Probably says on the boxes?

 

[LibraRider]

Hello! Yes I would be interested! Is the 80mm one a black one? And will it fit a 31.8mm bar?
Thanks @vickster

 

[cyberknight]

deda logo elementi were 26 mm or standard clamp

 

[fixedfixer]

I’ll measure and report back tomorrow evening

 

[cyberknight]

I’ll measure and report back tomorrow evening

just trying to help the white one is definitely OS just compare the size of the holes

 

[fixedfixer]

@cyberknight thanks for the help, much appreciated. Now, managed two photo's this morning using a caliper measure. Wasn't sure if I was doing this right, but I nipped up the clamp and these are what I found. So, over to the more experienced to say what size they'd be marketed as. I did check the boxes that the black ones come with and they annoyingly don't give the clamp size.

 

[LibraRider]

Hmm looks like the black ones fit a standard bar - I need an OS one.

 

[DCBassman]

Hmm looks like the black ones fit a standard bar - I need an OS one.

The white one, then, if the right length...
Edit: No, too long, I'm thinking