DIY Garden Room Base

Page may contain affiliate links. Please see terms for details.

icowden

Guru
Location
Surrey
HI All,

I am embarked upon a project to reclaim my garden from a wall of Leylandii type trees currently occupying the bottom third of the garden.
The garden is about 10m wide, and half of it I want to screen with nicer trees. The other half I want to build a garden room in.

I've looked at buying a garden room but they are very expensive. I've also found various DIY solutions online which I reckon I could do.
The question is, what would you do in terms of a base? I've seen various options including the standard put down a patio, the plastic matting stuff and finally ground screws.

What would you go for?
 

Jameshow

Guru
I would put it on concrete blocks every 4ft or so. Keeping it just off the ground with a dpm between the blocks and the treated timber.
Giving the base another coat of wood preservative or creosote wouldn't hurt.
 

Beebo

Firm and Fruity
Location
Hexleybeef
We went for a proper concert base. Dig out the ground and install shuttering, then pour concrete and add rebar.

We are lucky that we have rear access so a mixer could pour straight into the hole. I wouldn’t want to be barrowing it.

My neighbours have just had one done this summer and I am now very jealous. It is hand built by a local contractor. The base is a solid concrete slab with two courses of engineering bricks on top. Then loads of wood.

If and when I ever change my summer house, this is what I will do.

IMG_9687.jpeg
 
Last edited:

Emanresu

I asked AI to show the 'real' me.
How wet does your ground get?

Professional concrete base (plus utilities) gets you a long way in terms of what you can put on it. Matting and bricks if it isn't going to be there long.
 

Jameshow

Guru
We went for a proper concert base. Dig out the ground and install shuttering, then pour concrete and add rebar.

We are lucky that we have rear access so a mixer could pour straight into the hole. I wouldn’t want to be barrowing it.

My neighbours have just had one done this summer and I am now very jealous. It is hand built by a local contractor. The base is a solid concrete slab with two courses of engineering bricks on top. Then loads of wood.

If and when I ever change my summer house, this is what I will do.

View attachment 822474

Concrete base and engineering bricks are the rolls Royce tbh.
 
OP
OP
icowden

icowden

Guru
Location
Surrey
OK - a lot of love for concrete bases. Has anyone tried with groundscrews (concreted or otherwise) ?

I keep seeing this sort of thing:
quickjack-soft-surfaces-image-01.jpg
 

Emanresu

I asked AI to show the 'real' me.
Have you been over to Buildhub. Have had a lot done in the past few years and there are a lot of knowledgeable people over there. Groundscrews come up a few times.

Someone is not a fan
I guess you've seen how groundscrews are hyped as the cheap and easy way for amateur construction. Yes they are, but for decking, fences etc I'd agree.
For a comfortable building you need damp proofing , materials that won't rot, insulation. Otherwise you will not be using it except as a store, until it falls apart in 10 years.

https://forum.buildhub.org.uk/search/?q=groundscrews&quick=1
 

slowmotion

Quite dreadful
Location
lost somewhere
If your building is going to have timber cladding, you should keep the bottom edge of the cladding at least 150-200 mm off ground level to prevent splashback from heavy rain wetting its bottom edge. I would use in-situ cast concrete pads ( with a few rebars ) set into the ground to raise the timber floor.
 
Top Bottom