exchange a sram 11-32 10 speed casette for ..

[cyberknight]

Another 10 speed cassette with a closer range .
this came off my boardman comp and probably has done less then 500 miles so still in mint condition, includes the matching chain.
I never needed the lowest gears so has anyone got another 10 speed cassette of good vintage they might like to swap ?
12-25 would be sweet although i am open to offers .

 

[TheDoctor]

I have a 105 12-25 I'd be willing to swap.
It's done about 200 miles with me, but I don't know how many with jiggerypokery (who I bought it from).
It runs fine on a new KMC chain, which I'd send too.
Interested?

 

[cyberknight]

I have a 105 12-25 I'd be willing to swap.
It's done about 200 miles with me, but I don't know how many with jiggerypokery (who I bought it from).
It runs fine on a new KMC chain, which I'd send too.
Interested?

Any piccies or can you find out how much wear ?
Sounds a good swap .

 

[TheDoctor]

I'll try and take some.
Tell me - what rear mech are you using? I'm not sure a 105 (which I have) would take a 32T sprocket.

 

[cyberknight]

I'll try and take some.
Tell me - what rear mech are you using? I'm not sure a 105 (which I have) would take a 32T sprocket.

sram apex long cage, if you have a short cage mech i doubt you can run it TBH, if not i will try it on the classified.

 

[cyberknight]

google says 28 tooth max.

 

[TheDoctor]

Ah, I could give it a go. Or get a decent 9 speed MTB mech, which will do it.
Right, let's go take some photos.

 

[TheDoctor]

Here's the best two images. That's just as the wheel came out of the bike.
Hope that helps.

 

[cyberknight]

As far as i can tell look ok, did you want a piccie of mine ?, would be tomorrow now, although mines clean as its been hanging on a hook in the garage

 

[TheDoctor]

No need, I know what a cassette looks like
OK, we on then? PM me your address if so, and I'll whip'em in the post.
Chain and quick-link, cassette and lockring - 11T lockrings are different to 12T IIRC.
I'll hang on to the 1mm spacer, so don't send me your one!
Probably be at the weekend, if that's OK?

 

[cyberknight]

No need, I know what a cassette looks like
OK, we on then? PM me your address if so, and I'll whip'em in the post.
Chain and quick-link, cassette and lockring - 11T lockrings are different to 12T IIRC.
I'll hang on to the 1mm spacer, so don't send me your one!
Probably be at the weekend, if that's OK?

Ok,
although i have not got a spacer anyway , it never came with one and the cassette i have on is an 11t so i did not have to get a new lockring.