I want to fit a SRAM Force 12 speed cassette to a Tacx XDR freehub to go onto a turbo trainer. I am not used to SRAM stuff as I’ve only ever had Campagnolo before. When I mount the cassette onto the hub it does not seem to sit very flush and the lockring seems very stiff so I want to check that I’m doing it right before I break anything.
Fitting SRAM XDR cassette
- Thread starter Savvas
- Start date
Page may contain affiliate links. Please see terms for details.
iluvmybike
Über Member
That's not right - the cassette should sit right up against the shoulder
iluvmybike
Über Member
Shimano & SRAM both have one spline on the freehub which is narrower than the others and there is a corresponding narrow slot on the cassette. Match those up and it should slide easily up to the shoulder of the freehub. Do it one sprocket at a time to make sure you get it right
