gillelive
Active Member
- Location
- North West
FOR SALE: 2011 SIRRUS COMP
I am reluctantly putting my Sirrus up for sale . I am suffering with knee and IT Band problems and have been for the past year. As I am not sure when I will be back in a saddle, if at all, I have decided to sell the bike rather than see it just sat there depreciating.
The bike is a 2011 Specialized Sirrus Comp, the top end of the Sirrus range. It’s sized ‘Large’, I am 5’11’’. It‘s a year old and has covered a mere 150 miles.
The carbon forks have been replaced as part of a national Specialized recall notice – paperwork available.
The flat pedals were replaced with Shimmano spds soon after I bought it.
The bike is in very good condition. A detailed spec is set out below.
At the moment I am just looking to see if there is any interest before I add photos and advertise on e-Bay.
I am looking for £450; the retail cost in May 2011 was £700.
If the bike sells I will also have other bits for sale, just ask and I will give you a price and more details: Work stand, Lights, Wireless computer, Race blades, Bottle cages, Wedge bag, Traxx turbo etc.
Let me know if you are interested. I am in Liverpool for the collection of bike, work stand, turbo and other bits.
Carl
Specialized Sirrus Comp Specifications
Frame: Specialized a1 premium aluminium, fully manipulated tubing, smooth weld compact design, internal cable routing, integrated headset, fender and rack eyelets
Fork: Specialized fact carbon legs, aluminium crown & steerer, fender eyelets
Headset: 1-1/8" sealed cr-mo bearings integrated w/ headset, 20mm alloy cone spacer with 20mm of spacers
Stem: Specialized elite-set, 3d forged alloy, 4-position adjustable, 4-bolt 31.8mm clamp
Handlebars: Specialized 2014 alloy, 5-degree bend
Tape: Body geometry locking comfort grips open-end with plug, alloy barend
Front brake: Forged 6061 aluminium, 85mm linear pull w/ cartridge pads
Rear brake: Forged 6061 aluminium, 85mm linear pull w/ cartridge pads
Brake levers: Tektro forged alloy
Front derailleur: Shimano alivio, top swing
Rear derailleur: Shimano deore lx
Shift levers: Shimano alivio
Cassette: Shimano alivio, 9-speed, 11-32t
Chain: Hg-73
Crankset: Shimano 443 w/ chainguard
Chainrings: 48 x 36 x 26t
Rims: Alex 5480 double-wall rims
Front hub: Forged aluminium, sealed bearing, qr, 32h
Rear hub: Forged alloy, double-sealed, cassette, qr, 32h
Spokes: Stainless 14g
Front tire: Specialized all condition armadillo elite, 700x28c, aramid bead, 120tpi, w/ lightweight puncture protection
Rear tire: Specialized all condition armadillo elite, 700x28c, aramid bead, 120tpi, w/ lightweight puncture protection
Inner tubes: Standard presta valve
Saddle: Body geometry riva road, 155mm width
Seatpost: Specialized elite, carbon wrapped alloy, two-bolt clamp, 27.2mm
I am reluctantly putting my Sirrus up for sale . I am suffering with knee and IT Band problems and have been for the past year. As I am not sure when I will be back in a saddle, if at all, I have decided to sell the bike rather than see it just sat there depreciating.
The bike is a 2011 Specialized Sirrus Comp, the top end of the Sirrus range. It’s sized ‘Large’, I am 5’11’’. It‘s a year old and has covered a mere 150 miles.
The carbon forks have been replaced as part of a national Specialized recall notice – paperwork available.
The flat pedals were replaced with Shimmano spds soon after I bought it.
The bike is in very good condition. A detailed spec is set out below.
At the moment I am just looking to see if there is any interest before I add photos and advertise on e-Bay.
I am looking for £450; the retail cost in May 2011 was £700.
If the bike sells I will also have other bits for sale, just ask and I will give you a price and more details: Work stand, Lights, Wireless computer, Race blades, Bottle cages, Wedge bag, Traxx turbo etc.
Let me know if you are interested. I am in Liverpool for the collection of bike, work stand, turbo and other bits.
Carl
Specialized Sirrus Comp Specifications
Frame: Specialized a1 premium aluminium, fully manipulated tubing, smooth weld compact design, internal cable routing, integrated headset, fender and rack eyelets
Fork: Specialized fact carbon legs, aluminium crown & steerer, fender eyelets
Headset: 1-1/8" sealed cr-mo bearings integrated w/ headset, 20mm alloy cone spacer with 20mm of spacers
Stem: Specialized elite-set, 3d forged alloy, 4-position adjustable, 4-bolt 31.8mm clamp
Handlebars: Specialized 2014 alloy, 5-degree bend
Tape: Body geometry locking comfort grips open-end with plug, alloy barend
Front brake: Forged 6061 aluminium, 85mm linear pull w/ cartridge pads
Rear brake: Forged 6061 aluminium, 85mm linear pull w/ cartridge pads
Brake levers: Tektro forged alloy
Front derailleur: Shimano alivio, top swing
Rear derailleur: Shimano deore lx
Shift levers: Shimano alivio
Cassette: Shimano alivio, 9-speed, 11-32t
Chain: Hg-73
Crankset: Shimano 443 w/ chainguard
Chainrings: 48 x 36 x 26t
Rims: Alex 5480 double-wall rims
Front hub: Forged aluminium, sealed bearing, qr, 32h
Rear hub: Forged alloy, double-sealed, cassette, qr, 32h
Spokes: Stainless 14g
Front tire: Specialized all condition armadillo elite, 700x28c, aramid bead, 120tpi, w/ lightweight puncture protection
Rear tire: Specialized all condition armadillo elite, 700x28c, aramid bead, 120tpi, w/ lightweight puncture protection
Inner tubes: Standard presta valve
Saddle: Body geometry riva road, 155mm width
Seatpost: Specialized elite, carbon wrapped alloy, two-bolt clamp, 27.2mm