RSP20

Page may contain affiliate links. Please see terms for details.

Plinsky

New Member
Good afternoon all,

Apologies for troubling you. I have lost the instructions on the RSP20 and I was wondering if anybody has one. I can remember pretty much all steps but there are two things I am not sure what they are.
Going through the set up is as follows:
1. Wheel size: happy
2. km vs. miles: happy
3. Number 23 displayed next to the bike flashes: what does this set?
4. Number 160 (below number 23) flashes: what does this set?

The rest I am OK with. Many thanks in advance for all your help and support and apologies for troubling you.

Best Regards,

Plinsky
 

paul04

Über Member
Have a read here, it might help you
http://sheldonbrown.com/cyclecomputer-calibration.html
 
OP
OP
P

Plinsky

New Member
Thanks guys - I had look at the sheldon website but it doesn't explain my queries: I have e-mailed Raleigh. Hopefully I will get a reply. I just don't know what those two particular settings are...
 
Not sure about this... Is 23 the temperature and 160 service program (remind to replace parts n' lube chain after a preset distance is reached)?

I've got the RSP18 with cadence. The computer settings are:

Set wheel size
Km or M selection
12/24 selection
Set service programme

Raleigh are useless replying to emails.. I'll be very surprised if you get a reply..
 
OP
OP
P

Plinsky

New Member
Thanks rocky raccoon,
There is a setting between Km and M selection and the 12/24. It is not temp., Celsius, service or 12/24... I thought it might be weight (in pounds or Kgs)...?
 
OP
OP
P

Plinsky

New Member
OK, just heard back from Raileigh...we were close: it was actually age and weight in pounds! Thanks very much everyone!

Plinsky
 
Top Bottom