MacB
Lover of things that come in 3's
- Location
- Farnborough, Hampshire
£430 collected or for £450 £480 collected or for £500 I'll deliver within 30 miles of Farnborough, Hampshire, and will include London Waterloo station as well. I can arrange delivery further afield but kind of hoping not to.
Payment by cash, paypal gift or bank tranx please.
So what we have here is a new frameset with some new and some used parts...THERE IS NO SADDLE INCLUDED I AM KEEPING THE BROOKS:-
http://www.flickr.com/photos/37729119@N08/with/7741624180/#photo_7741624180
Frame and forks are new, the steerer tube has been shortened to 265mm, still plenty of adjustment above and below stem
Headset is new, DiaCompe CB2 cartridge in black
Ergo grips and tape over foam is all new
Brake cable inner and outer are new
Chain is new, SRAM PC830 I think with powerlink
Chainset and BB are new - Truvativ Firex 1.1 33t plus bash and the SRAM GXP style BB, I added two Hope BB spacers, 2.5mm each side as it came from a 73mm BB shell bike...as per the Truvativ instructions
The cheap plastic pedals are new if they are wanted
Headset spacers are new
Brand X 120mmx15deg 25.4mm clamp stemp is new
Superstar SS kit with 14t cog is new
Mudguards - SKS are used but in full working order and you can see from the pics I've left them at max distance to allow for full tyre clearance Xcheck is capable of. Points of note though, having previously been on a disc brake bike there is only one stay on the front mudguard non driveside. The rear mudguard also has a hole drilled in it for a previous vertical fitting, this is covered by electrical tape.
v-brake levers - are ok but have been fairly well used
handlebars - are from an old MTB and are the steel ones that curve into bullhornish style at the front...25.4mm clamp
v-brakes - Deore BR M530, used but in excellent condition, they have new Tri compound cartridges as well
seatpost - a bikehut inline 27.2x350 or 400 - has done less than 50 miles on another bike
wheels - are from an EBC courier Race and have less than 1k miles, they are Ritchet 622-18 rims so well able to take tyres up to the Xcheck clearances. The rear did have an 8 speed cassette(which is included if wanted) so bike can be run geared or SS with same wheelset.
skewers - plain silver Shimano ones and pretty tough, I haven't done the rear up supertight and can stand on the pedlas without the rear wheel moving...all 18 stone of me. I have had the 32h wheels trued and also the front has new bearings.
tyres and tubes - standard Marathons in 700x32 and Specialised presta inner tubes in 700x28-38 - none of which has done more than 20 miles...you should be able to see the newness of the tyres from the picutres.
Sorry should have added it's 33x14 SS giving approx 63.7 gear inches and the bits that came with the Xcheck frame, dropout bolts and rear canti hanger are included unused.
Payment by cash, paypal gift or bank tranx please.
So what we have here is a new frameset with some new and some used parts...THERE IS NO SADDLE INCLUDED I AM KEEPING THE BROOKS:-
http://www.flickr.com/photos/37729119@N08/with/7741624180/#photo_7741624180
Frame and forks are new, the steerer tube has been shortened to 265mm, still plenty of adjustment above and below stem
Headset is new, DiaCompe CB2 cartridge in black
Ergo grips and tape over foam is all new
Brake cable inner and outer are new
Chain is new, SRAM PC830 I think with powerlink
Chainset and BB are new - Truvativ Firex 1.1 33t plus bash and the SRAM GXP style BB, I added two Hope BB spacers, 2.5mm each side as it came from a 73mm BB shell bike...as per the Truvativ instructions
The cheap plastic pedals are new if they are wanted
Headset spacers are new
Brand X 120mmx15deg 25.4mm clamp stemp is new
Superstar SS kit with 14t cog is new
Mudguards - SKS are used but in full working order and you can see from the pics I've left them at max distance to allow for full tyre clearance Xcheck is capable of. Points of note though, having previously been on a disc brake bike there is only one stay on the front mudguard non driveside. The rear mudguard also has a hole drilled in it for a previous vertical fitting, this is covered by electrical tape.
v-brake levers - are ok but have been fairly well used
handlebars - are from an old MTB and are the steel ones that curve into bullhornish style at the front...25.4mm clamp
v-brakes - Deore BR M530, used but in excellent condition, they have new Tri compound cartridges as well
seatpost - a bikehut inline 27.2x350 or 400 - has done less than 50 miles on another bike
wheels - are from an EBC courier Race and have less than 1k miles, they are Ritchet 622-18 rims so well able to take tyres up to the Xcheck clearances. The rear did have an 8 speed cassette(which is included if wanted) so bike can be run geared or SS with same wheelset.
skewers - plain silver Shimano ones and pretty tough, I haven't done the rear up supertight and can stand on the pedlas without the rear wheel moving...all 18 stone of me. I have had the 32h wheels trued and also the front has new bearings.
tyres and tubes - standard Marathons in 700x32 and Specialised presta inner tubes in 700x28-38 - none of which has done more than 20 miles...you should be able to see the newness of the tyres from the picutres.
Sorry should have added it's 33x14 SS giving approx 63.7 gear inches and the bits that came with the Xcheck frame, dropout bolts and rear canti hanger are included unused.