MacB
Lover of things that come in 3's
- Location
- Farnborough, Hampshire
PRICE REDUCTION £140 shipped or £130 collected - £150 shipped or £140 collected in the UK, payment via paypal gift, bank tranx or cash on collection. This is about a 30% reduction in what I paid though they seem to be far more expensive now, if you can find them.
Okie dokie, here we have an extremely lightly used pair of forks. I replaced them a while ago but have only just got around to taking pics etc. They are in immaculate condition this is another result of my irrational fear of carbon. Now using steel unicrown forks which are nowhere near as attractive but I'm happier. Pics:-
http://www.flickr.com/photos/37729119@N08/6582245095/in/photostream
There is one small blemish on the back of the crown where a mudguard fitting rubbed. This is on the alloy crown and you can see about 3mm of the crown directly above where the fork is drilled, I have tried to show this in closeup in the pics. Specs:-
Carbon blades and alloy crown and steerer, drilled and eyeletted for mudguards
Clearance - I found a 700x42 tyre with full guards was comfortable, I believe 700x44 is the official clearance
Disc brake only, 160mm rotor IS mount and forks are rated up to tandem use
Weight - 682g
Axle to Crown - 398mm
Rake - 45mm
Steerer - 1 1/8 300mm and is uncut
the forks have only been used on road and with a Hope headset. So a press fit crown race and an allen key fit bung rather than a star nut. As in they haven't been bashed around at all. They have covered a total of about 150 road miles, no crashes and no dings of any kind.
Okie dokie, here we have an extremely lightly used pair of forks. I replaced them a while ago but have only just got around to taking pics etc. They are in immaculate condition this is another result of my irrational fear of carbon. Now using steel unicrown forks which are nowhere near as attractive but I'm happier. Pics:-
http://www.flickr.com/photos/37729119@N08/6582245095/in/photostream
There is one small blemish on the back of the crown where a mudguard fitting rubbed. This is on the alloy crown and you can see about 3mm of the crown directly above where the fork is drilled, I have tried to show this in closeup in the pics. Specs:-
Carbon blades and alloy crown and steerer, drilled and eyeletted for mudguards
Clearance - I found a 700x42 tyre with full guards was comfortable, I believe 700x44 is the official clearance
Disc brake only, 160mm rotor IS mount and forks are rated up to tandem use
Weight - 682g
Axle to Crown - 398mm
Rake - 45mm
Steerer - 1 1/8 300mm and is uncut
the forks have only been used on road and with a Hope headset. So a press fit crown race and an allen key fit bung rather than a star nut. As in they haven't been bashed around at all. They have covered a total of about 150 road miles, no crashes and no dings of any kind.