Sprocket exchange

Page may contain affiliate links. Please see terms for details.

Amanda P

Legendary Member
I was sorting through my box of bits the other day when I came across a bag of mixed Shimano and SRAM sprockets. These are from when I've split cassettes to get the exact sprockets I want, and I've been left with the ones I don't want, usually completely unworn.

So, I would like a couple of sprockets of around 28 or 30 teeth.

In exchange, I can offer a range of smaller sprockets from 11 to about 24 teeth (if anyone's interested, I'll post a list of exactly what there is).

Feel free to use this thread to post your own sprocket wants or offers.
 

peanut

Guest
Ok Phil .... errr... all your 14s for all my 32s :biggrin:

I'm up for a swop I have loads of new sprockets from doing the same as you.

I'll list mine . I know I have a 32 if its any use. Its a 9 speed Deore so very light and thin.
 

peanut

Guest
would you like the 32 sprocket Phil? it appears new and unused although it needs a bit of a clean which I'll give it before sending.
it is an 'ar 'Deore LT or XT I think.
I could use an 11 and 12t 9 or 10 speed shimano if you have them
 
OP
OP
Amanda P

Amanda P

Legendary Member
Here's what I have:

11 x 2
12
13 x 3
15
17
20 x 2
23
26
32 (SRAM)

All Shimano except the SRAM one. It's my understanding that the sprockets are basically the same for all Shimano and SRAM cassettes, but with different spacers for 8, 9 or 10 speed, with the exception of the small sprockets up to 13, which have their own spacers built in.

What I'd like:

24 and 28, ideally two of each.
 

peanut

Guest
sorry Phil can't help with a 28t they are as scarce as hen's teeth. Only got a Deore 32
I have a feeling Shimano sprockets throughout the range vary in thickness and the accumulative effect could make a cassette 1-2 mm too wide or too narrow.best to check the stamped code with Sheldon
 
Top Bottom