Tea?

[classic33]

Don't think he'd have to buy a brown..

the glue is great but jeez, speed is of the essence..
Use it at yer peril
Pavement out front looks dodgy..
Think I'll stay in....play radio..
Monthly radio award thing on and guess I'll be playing with it the rest of the month..
Get an award for one thing then work on others..
I'm even talking to other people albeit call and signal exchange then pleasantries, short and sweet..
Panic buying ? I better stock porridge and milk..
Mrs said to ratlle up something for my tea last night..
Had a look and just made more porridge
Couldn't be bothered with all the palaver of cooking,
I'll have something different for lunch though....
Poached eggs, another thing I have a passion for (made by Bob though).
My brain is frazzled, I am printing more of these morse keys and still the same first layer problem, I've got the textured plate on and I just don't get it, one more thing to try....

Don't think he did. Nor did he abuse his spotlight position. Waited in line like everyone else.

If I could ever get it to stick two items together I'd have been lucky. That or I'd done something wrong.
Never looked too bad round these parts, despite the temperature. You stayed inside?
Much success playing radio, whichever way you used.
There's "heavy snowfall" threatened again. You could be stuck for a whole day. Enough in to last...
Porridge fer breakfast and dinner! I think yer becoming addicted to it, and it's too late do anything. "Death by porridge", what a way to go.
Smoked kippers, done inside where its safe...
No-one else poaches eggs like you do?
Is the problem within the file itself or does it happen with other stuff as well.
Might be time to print another lucky cat. Banish the bad spirits within the printer. Offer a sacrifice to the printer gods...

 

[Bobby Mhor]

Sitting at 3.1c just now..
some rain earlier, half a mm..
Never made it out but hopefully tomorrow (maybe)...got a red alert for aurora an hour ago but too cloudy here just now.
I had white blonde hair until my hormones kicked in.

 

[classic33]

Sitting at 3.1c just now..
some rain earlier, half a mm..
Never made it out but hopefully tomorrow (maybe)...got a red alert for aurora an hour ago but too cloudy here just now.
I had white blonde hair until my hormones kicked in.

Just about 1°C round here. Forecast to go to minus eight overnight. We'll see if they get this bit right, or even close.
No rain but the fog is making its return...
Out for most of the day, with not a lot to show for it either.
There'll be no chance of any aurora sighting here if that fog doesn't move.
What colour did it change to when they kicked in!

 

[Bobby Mhor]

Don't think he did. Nor did he abuse his spotlight position. Waited in line like everyone else.

If I could ever get it to stick two items together I'd have been lucky. That or I'd done something wrong.
Never looked too bad round these parts, despite the temperature. You stayed inside?
Much success playing radio, whichever way you used.
There's "heavy snowfall" threatened again. You could be stuck for a whole day. Enough in to last...
Porridge fer breakfast and dinner! I think yer becoming addicted to it, and it's too late do anything. "Death by porridge", what a way to go.
Smoked kippers, done inside where its safe...
No-one else poaches eggs like you do?
Is the problem within the file itself or does it happen with other stuff as well.
Might be time to print another lucky cat. Banish the bad spirits within the printer. Offer a sacrifice to the printer gods...

I see they are threatening us with heavy snow as well...
As above, aye..
Mrs out with the gang and their mum..
Getting some printing, did a couple of tweaks so will see how it turns out, changed to the infill to a stronger one but as its a not heavily used item it doesn't matter but it did add 40 mins to the job, most likely as the infill is much denser.. expected to finish just before 12ish, two more to do tomorrow in another colour then a check for how much other pieces needed made to finish them off. The bases have averaged just over 14 hours for three, finish on first two not bad at all, still need to find out what's causing the odd bloop on the first layer, I redone the file and moved it off the area the other ones were printed. My thoughts were maybe the plate below the plate has lost heat in certain bits. If not, it's definitely the cold garage which is around 9c tonight.

Got the Toob on and catching up on some of 'From Here to There' videos, bloke goes to some out of the way and interesting places..

More rain, another .2 mm...
Past my bed time, printer says 1 hr 9 mins...

Just about 1°C round here. Forecast to go to minus eight overnight. We'll see if they get this bit right, or even close.
No rain but the fog is making its return...
Out for most of the day, with not a lot to show for it either.
There'll be no chance of any aurora sighting here if that fog doesn't move.
What colour did it change to when they kicked in!

 

[classic33]

I see they are threatening us with heavy snow as well...
As above, aye..
Mrs out with the gang and their mum..
Getting some printing, did a couple of tweaks so will see how it turns out, changed to the infill to a stronger one but as its a not heavily used item it doesn't matter but it did add 40 mins to the job, most likely as the infill is much denser.. expected to finish just before 12ish, two more to do tomorrow in another colour then a check for how much other pieces needed made to finish them off. The bases have averaged just over 14 hours for three, finish on first two not bad at all, still need to find out what's causing the odd bloop on the first layer, I redone the file and moved it off the area the other ones were printed. My thoughts were maybe the plate below the plate has lost heat in certain bits. If not, it's definitely the cold garage which is around 9c tonight.

Got the Toob on and catching up on some of 'From Here to There' videos, bloke goes to some out of the way and interesting places..

More rain, another .2 mm...
Past my bed time, printer says 1 hr 9 mins...

I think we'll get about the same as last time, not a lot.
With the super glue?
Out and you weren't invited. Women only do...
Leaving you home alone, doing who knows what.
How many of these keys are you printing as samples! Or have you got that good you can use one in each hand.
Does the plate need to be warm the whole time yer printing or just the base layer. As you move further away from the plate, whilst printing, it's got to have less effect.

Any places near you that you can visit when the warmer weather arrives. To be honest, the out of the way places can be more interesting than the big tourist traps.

In bed and "asleep" before Mrs M gets back, with an alarm set for when the printer finishes its job.
Sleep well, for tomorrow you will fight the printer...