Tea?

[Bobby Mhor]

Two piece jobbie?
Who's copy got printed first, yours or his.
Nozzles awkward to change!

You took yer chance whilst the boss wasn't looking...
How high were these high bits you talk off...
Those three you think were the same as one the day before, do they all count. Or, is some creative record keeping required on your part.
Hope you were in't passenger seat whilst your hands were out the window, not the drivers.
He might have been. But he'd have got to the bottom of things before letting you go on yer way...
Not bad indeed for an of the moment experiment. Just the legs holding you back from higher things. There's some exo-skeleton legs out there now, for use by anyone. Only $999!
Maybe next time you're up that way, the whole road will be opened for you... Your tour dreams will happen, and you'll have a pedal free descent with the chance to practice your aero tucking as well.

They'll love you down the post office. I can see them now as they spot you walking in, deciding who gets to serve you. Have you thought of shorter pockets, save you digging as deep.

Ahead on the precipitation front, by about five times. Makes a change, you're usually well in't lead.

6.6 mm so far..

Nozzle? dunno, I haven't done one before..
YouTube to watch how...
All around 600 -650 ft ASL (?).....
Something on the small screen showed three mentions of the previous one, but I never checked what it meant, it's gone now...
Mrs M was wheely focused.

Postie delivered another two lots with 45 cards in them, so all labels ready to stick on, I've not got enough cards LOL,
I need to contact Great Uncle card man....


Bunny finished, apart from the bolt etc and painting...needs a longer one..
The silhouette looks good

Busy day....lazy day tomorrow.

 

[classic33]

6.6 mm so far..

Nozzle? dunno, I haven't done one before..
YouTube to watch how...
All around 600 -650 ft ASL (?).....
Something on the small screen showed three mentions of the previous one, but I never checked what it meant, it's gone now...
Mrs M was wheely focused.

Postie delivered another two lots with 45 cards in them, so all labels ready to stick on, I've not got enough cards LOL,
I need to contact Great Uncle card man....


Bunny finished, apart from the bolt etc and painting...needs a longer one..
The silhouette looks good
View attachment 778670
Busy day....lazy day tomorrow.

Dry during daylight hours, but you might be catching up...

Nowt in the manual/USER guide showing you how?
Find that youtube only shows their successes, not the problems they had doing it. Unless they want to show you possible problems you might meet.
And you're in a dip, at home base!
Well what you never saw, you'll never miss. But you might wonder about...
Just as well one of you were.

Your postie knows what he's delivering? Or just that the bag gets a bit lighter when he's been to you.
Two lots of 45, or 45 in total.
Make certain to get enough from Great Uncle Card Man, to last a while.

Coping Saw or jigsaw used to cut the parts out?
You gonna be playing with it whilst you're painting it.

Busy doing nothing, or as little as possible. Either way enjoy yerssen.

 

[Bobby Mhor]

Good morning
Just back from a very short round trip of the area...
Drizzle when I left but a bit brighter now.

 

[Bobby Mhor]

Dry during daylight hours, but you might be catching up...

Nowt in the manual/USER guide showing you how?
Find that youtube only shows their successes, not the problems they had doing it. Unless they want to show you possible problems you might meet.
And you're in a dip, at home base!
Well what you never saw, you'll never miss. But you might wonder about...
Just as well one of you were.

Your postie knows what he's delivering? Or just that the bag gets a bit lighter when he's been to you.
Two lots of 45, or 45 in total.
Make certain to get enough from Great Uncle Card Man, to last a while.

Coping Saw or jigsaw used to cut the parts out?
You gonna be playing with it whilst you're painting it.

Busy doing nothing, or as little as possible. Either way enjoy yerssen.

Just back from a test,
flashed the other board this morning and headed out out around the local area,
I'll be honest antenna not up to much at base, a piece of wet string could have done better
Tried 7 tests and 5 were successful, 4 returned an ack for my position, but I was less than a mile most times..
I'll work out distances later once I return..
TBH I'm a bad RX area

Yeah, a saw thing, must be a coping one...
then buffed down using a sanding belt and some round sanding thing to get where the belt couldn't,
You know the drill (groan)
I'm chuffed anyway....

Yeah, another 1000 as cannot buy too many at my age LOL although I've sent 2,000 in 6 uears...
Might just go with my last card photo (the Kelpies)

 

[classic33]

Good morning
Just back from a very short round trip of the area...
Drizzle when I left but a bit brighter now.

Owdo
On foot?
Nothing like that here!

 

[classic33]

Just back from a test,
flashed the other board this morning and headed out out around the local area,
I'll be honest antenna not up to much at base, a piece of wet string could have done better
Tried 7 tests and 5 were successful, 4 returned an ack for my position, but I was less than a mile most times..
I'll work out distances later once I return..
TBH I'm a bad RX area

Yeah, a saw thing, must be a coping one...
then buffed down using a sanding belt and some round sanding thing to get where the belt couldn't,
You know the drill (groan)
I'm chuffed anyway....

Yeah, another 1000 as cannot buy too many at my age LOL although I've sent 2,000 in 6 uears...
Might just go with my last card photo (the Kelpies)

And were the test successful, wet string or otherwise.
How do you know the fifth was a success if there's no ack for it. Was this the short walk round the area that you mentioned earlier?
I'd say no more than a mile at best. What sorta distance you hoping to get with yer setup...
TX wise, what's the area like.

Don't forget the fret saw, finer blade, sometimes a wire, and a deeper frame than a coping saw.
No hand sanding! Shame on you...
Bosch or Black and Decker?
Just need the longer bolt now, and it'll be finished.

A 1,000 might see the year out for you.
You been banned from the post office yet.
You get to choose what's on one side of your cards?

 

[Bobby Mhor]

And were the tests successful, wet string or otherwise?
How do you know the fifth was a success if there's no ack for it? Was this the short walk around the area that you mentioned earlier?
I'd say no more than a mile at best. What sorta distance you hoping to get with yer setup...
TX wise, what's the area like.

Don't forget the fret saw, finer blade, sometimes a wire, and a deeper frame than a coping saw.
No hand sanding! Shame on you...
Bosch or Black and Decker?
Just need the longer bolt now, and it'll be finished.

A 1,000 might see the year out for you.
You been banned from the post office yet.
You get to choose what's on one side of your cards?

When I get an Ack..
I then send a position report..
I got the ack but not for the position...
best the last time was 13 kms....or was it miles

Yeah, but I took the bike...
and i felt it..

Ended up lunching at the brekkie place....

Fret saw was at other end of bench I was working at...
I did a quick rub round the edges with a bit of finer stuff.
Paint? maybe over the weekend.

Yep, I have had two different fronts, the back was the same for the two of them...
I'll mail him over the next few days.
Get the backlog sent tomorrow..
Must slow down LOL.

Long day....

 

[classic33]

When I get an Ack..
I then send a position report..
I got the ack but not for the position...
best the last time was 13 kms....or was it miles

Yeah, but I took the bike...
and i felt it..

Ended up lunching at the brekkie place....

Fret saw was at other end of bench I was working at...
I did a quick rub round the edges with a bit of finer stuff.
Paint? maybe over the weekend.

Yep, I have had two different fronts, the back was the same for the two of them...
I'll mail him over the next few days.
Get the backlog sent tomorrow..
Must slow down LOL.

Long day....

They don't want you to know where they are, making your working out harder still...
First is just over half the second. I'd go with miles, it sound better.

Have they said if they'll forgive you yet.

Brekkie at lunchtime. They must have been wondering...

Not within easy reach.
Who'd you make it for?

Not bad if you can choose your card design as part of the package you have.
How many do you take at a time. Is it like the banks when you empty your copper bottle, £10 a time.
Slow down at your age!

Nearly done though....

 

[Bobby Mhor]

They don't want you to know where they are, making your working out harder still...
First is just over half the second. I'd go with miles, it sound better.

Have they said if they'll forgive you yet.

Brekkie at lunchtime. They must have been wondering...

Not within easy reach.
Who'd you make it for?

Not bad if you can choose your card design as part of the package you have.
How many do you take at a time. Is it like the banks when you empty your copper bottle, £10 a time.
Slow down at your age!

Nearly done though....

I never got round to doing a map..
Later maybe but a very busy day ahead...I still have to work out how efficient the antennas i have are..
Tried last night and tool I use is all over the place..

I take forgiveness from anyone... (aye right )

You send the bloke images and ideas, I pre did the back and fronts and he sets it up, then send you proofs and then if okay, prints...

Brekkie after 12, gets called something else with chips.....

 

[Bobby Mhor]

Good morning
It's the 4th..
Think I'll have TACOs....

 

[classic33]

I never got round to doing a map..
Later maybe but a very busy day ahead...I still have to work out how efficient the antennas i have are..
Tried last night and tool I use is all over the place..

I take forgiveness from anyone... (aye right )

You send the bloke images and ideas, I pre did the back and fronts and he sets it up, then send you proofs and then if okay, prints...

Brekkie after 12, gets called something else with chips.....

No map, what were you thinking of. They could have moved by the time you get a map.
Busy day, what happened to the quiet week you had planned on... They work, don't they!
Maybe miss a day, then approach in a fresh frame of mind.

Forgiveness, why'd you want forgiveness unless you've done summat you shouldn't or not done summat you should have.

He works from pictures alone, no 3D scanning or technical type drawings. He sounds as though he knows what he's doing. And there were me thinking you were getting yer ideas, and files, from various sites.

Fish n'...

 

[classic33]

Good morning
It's the 4th..
Think I'll have TACOs....

Owdo
May the fourth be with you...
Aren't TACO's Central American in origin?
You have what you want, I'll not stop you.

 

[Bobby Mhor]

No map, what were you thinking of. They could have moved by the time you get a map.
Busy day, what happened to the quiet week you had planned on... They work, don't they!
Maybe miss a day, then approach in a fresh frame of mind.

Forgiveness, why'd you want forgiveness unless you've done summat you shouldn't or not done summat you should have.

He works from pictures alone, no 3D scanning or technical type drawings. He sounds as though he knows what he's doing. And there were me thinking you were getting yer ideas, and files, from various sites.

Fish n'...

Still no map, plus I'd a bit of a test run today again and no map..no idea who ack'ed me.. this is useless.
Four acks from 5 sent 'Testing', no bad, one just at top of the hill too, almost instant reply too.
I'm busy, been a disastrous week, Maccy's cafe up 20p...what next?
Tomorrow is really busy
My notebook has a list of things to do..
who says retirement is easy living..

Dibdib place earlier...
I can 3d scan if need be

Owdo
May the fourth be with you...
Aren't TACO's Central American in origin?
You have what you want, I'll not stop you.

TACO was the orange hobgoblin's recent nickname...
like TACOs, he's full of mince (as we say oop here)

 

[classic33]

Still no map, plus I'd a bit of a test run today again and no map..no idea who ack'ed me..this is useless

No map still, yer slacking... it's only useless if you give up...

TACO was the orange hobgoblin's recent nickname...
like TACOs, he's full of mince (as we say oop here)

Still seems odd using a name that originated in the central American region. Especially given the way he's behaved towards the area.
He's full of summat, "mince" might be being kind towards him.

 

[classic33]

Scout hut, or were you kept inside by the rain?