Tea?

[classic33]

Jeez, snowing again.....
Sent you a bit I missed,doh!

My Chrome is as slow as get out, I doubt a move to Edge until this sorts itself out, I use edge anyway so no different, search seems better on Chrome though, I've maybe 5 browsers on my list....

I'm doing a two part antenna print but possibly I may have to change the nozze but I'll get stuff through a few times before I print, extrude is the word..
Off to try it..

Hail has stopped here, fer now. Wind continues to blow... Gusts of 37mph in the early hours here, will have another check later but it doesn't seem as bad.
You missed a muffin! Not like you at all, unless you were beaten to it.

Just Chrome and Edge on any portable technology, for myself.
What sorta problems are you wanting sorting out, before your move to Edge.

What does Mrs M want with a two part antenna print? Maybe she's thinking of taking up the radio lark...
Is this the same nozzle that were changed, by yerself, not that long ago. Didn't the ceramic one work out.
Happy extruding, in the hope it sorts yer problems out...

 

[Bobby Mhor]

Hail has stopped here, fer now. Wind continues to blow... Gusts of 37mph in the early hours here, will have another check later but it doesn't seem as bad.
You missed a muffin! Not like you at all, unless you were beaten to it.

Just Chrome and Edge on any portable technology, for myself.
What sorta problems are you wanting sorting out, before your move to Edge.

What does Mrs M want with a two part antenna print? Maybe she's thinking of taking up the radio lark...
Is this the same nozzle that were changed, by yerself, not that long ago. Didn't the ceramic one work out.
Happy extruding, in the hope it sorts yer problems out...

I've got a Vivaldi antenna

Brass is best I find...
It's probably the easiest way of sorting out nozzle problems.
Working away just now, this print is in more than two parts I think.
No hurry, looks like a double up in parts so be a longish one, present one is over 5 hrs print (I used a spool with enough PLA to do the one job so it'll be a mish mash, it'll be loft bound so nobody will see it.

Masterclass in the Flanders race..
I might get more done soon (13kms to go)..
Yeah, magic weather site with written words to explain,
it headed NE as someone sent me clear blue skies with a nice crisp morn, just over 90 mins later, the whole shebang hit.

She could probably pass the Foundation part.

I use Edge on the other computer for some reason.

 

[classic33]

I've got a Vivaldi antenna

Brass is best I find...
It's probably the easiest way of sorting out nozzle problems.
Working away just now, this print is in more than two parts I think.
No hurry, looks like a double up in parts so be a longish one, present one is over 5 hrs print (I used a spool with enough PLA to do the one job so it'll be a mish mash, it'll be loft bound so nobody will see it.

Masterclass in the Flanders race..
I might get more done soon (13kms to go)..
Yeah, magic weather site with written words to explain,
it headed NE as someone sent me clear blue skies with a nice crisp morn, just over 90 mins later, the whole shebang hit.

She could probably pass the Foundation part.

I use Edge on the other computer for some reason.

That could explain things then.

Might on the heat front, but wear rate might be higher. Merely surmizing why they have them in different materials.
Yer extruding weren't too painful, I hope.
Anyone does see it, it were done on purpose so you knew what it was for/colour coded. Bound to impress them.

What we're weather like for those taking part?
At their speeds, you'll have little excuse fer not getting some more done.
And it did it better than those that tell us what weather we'll be getting to boot.
That brief period of calm were to get you out, doing something, before the next lot hit.
Calmed down since?

Imagine the pair of you into it. The Battle of The Logbooks, or who got the most in one day, the remotest etc...

Yours not to reason why...

 

[Bobby Mhor]

That could explain things then.

Might on the heat front, but wear rate might be higher. Merely surmizing why they have them in different materials.
Yer extruding weren't too painful, I hope.
Anyone does see it, it were done on purpose so you knew what it was for/colour coded. Bound to impress them.

What we're weather like for those taking part?
At their speeds, you'll have little excuse fer not getting some more done.
And it did it better than those that tell us what weather we'll be getting to boot.
That brief period of calm were to get you out, doing something, before the next lot hit.
Calmed down since?

Imagine the pair of you into it. The Battle of The Logbooks, or who got the most in one day, the remotest etc...

Yours not to reason why...

Todays lot?
Two were missing...I think as I couldn't see them.
No joy with the other two, so 3 pts down so now 3.73 down....

Tomorrows? I'll check those tomorrow morning..

YL? or she'd be a XYL..
I logged up contacts last night, today? I'm sitting at 15 today

 

[classic33]

Todays lot?
Two were missing...I think as I couldn't see them.
No joy with the other two, so 3 pts down so now 3.73 down....

Tomorrows? I'll check those tomorrow morning..

YL? or she'd be a XYL..
I logged up contacts last night, today? I'm sitting at 15 today

Surprised there were any today.
That far behind...

Can't be calling her either of those...
Fifteen that a bad or average day.

 

[Bobby Mhor]

Surprised there were any today.
That far behind...

Can't be calling her either of those...
Fifteen that a bad or average day.

One had almost the same name so less 2pt..so 1.73 pts to the bad.......

 

[classic33]

One had almost the same name so less 2pt..so 1.73 pts to the bad.......

To make a fair comparison you'll have to pick some yourself.

 

[Bobby Mhor]

To make a fair comparison you'll have to pick some yourself.

Think Mr GPT is on the strong ale..
I'll post my choice at some point tomorrow and redo GPT's choices....
probably best to do it nearer the off.
Looks a cold evening 3 c the noo and falling...

21 today logged, it could be much higher...

Had enough for today.....