Tea?

Page may contain affiliate links. Please see terms for details.

classic33

Leg End Member
Good very wet morning :hello:
Creeping up to almost 10mm..
Plants will be loving it,
I'll give them a feed tomorrow.
Enjoy your day:cuppa:
Owdo, twas throwing it down at half two this morning. Here at least.
We may be ahead of you on the precipitation front. The grass seems to like it, it's turning green again.
Tomorrow, what's wrong with today!
You yours.
 

classic33

Leg End Member
I always enjoy myself...
I got some mini Danish, they didn't have the usual sized ones..
Gotta say their cakes are soo good.

Ole R2D2?
Mrs M wants one to replace the one I had...
Need to order more white...
I estimated it used 14 quid of material, estimate 2.5 quids in power, I'll take that.
My time? free..

I'll start it off later but no hurry TBH...
Surrounded by all those cakes, on a "you can look but can't touch" basis.
Twice as many if they were half the size?
Well, gotta take yer word on that, unless I end up there one day.

Another one on the books. You'll have a hard time now. R2-D2 first the next thing it'll be a CP3O to match... Ow'd you lose ole R2?
How much do you reckon you'll be needing. On or two spools...
Seems reasonable. A smaller kit version, from one of the manufacturers would have cost more.
You can't charge on a labour of love...

On another R2. Will what you order match it colourwise. I'm thinking of the paint used on models here, where they say slight variations between batches might occur.

And I'm blaming you for making me think today were Monday...
 

Bobby Mhor

Legendary Member
Location
Behind You
Surrounded by all those cakes, on a "you can look but can't touch" basis.
Twice as many if they were half the size?
Well, gotta take yer word on that, unless I end up there one day.

Another one on the books. You'll have a hard time now. R2-D2 first the next thing it'll be a CP3O to match... Ow'd you lose ole R2?
How much do you reckon you'll be needing. On or two spools...
Seems reasonable. A smaller kit version, from one of the manufacturers would have cost more.
You can't charge on a labour of love...

On another R2. Will what you order match it colourwise. I'm thinking of the paint used on models here, where they say slight variations between batches might occur.

And I'm blaming you for making me think today were Monday...

Welcome to Tuesday:ohmy:
It feels like it...
Computer no 1 went loopy yesterday, kept switching on and off occasionally,
It ended up in a constat loop of try to find out what was wrong,
Finally, I got and took the reinstall Windaes but keep my files option so fingers crossed it is all slowly getting back to normality.

Aye, there could be variances but anything barely noticeable I can live with, I'm short of white so another spool ordered.
I've just started the blue and the silver will be next,

I've the house to myself so I'll just laze today.
Oops, change of plan incoming..
See how things change, I'm out for a short time very soon..
Better go..
 

classic33

Leg End Member
Welcome to Tuesday:ohmy:
It feels like it...
Computer no 1 went loopy yesterday, kept switching on and off occasionally,
It ended up in a constat loop of try to find out what was wrong,
Finally, I got and took the reinstall Windaes but keep my files option so fingers crossed it is all slowly getting back to normality.

Aye, there could be variances but anything barely noticeable I can live with, I'm short of white so another spool ordered.
I've just started the blue and the silver will be next,

I've the house to myself so I'll just laze today.
Oops, change of plan incoming..
See how things change, I'm out for a short time very soon..
Better go..
Yer certain it's Tuesday, not Wednesday!
Is computer No.1, the one you recently cleaned the insides out on?
Hopefully you've lost no work.
I take it it was unable to find out what were wrong, so user intervention was the only option. Back to normality. Is that desirable...

Ah well, if you can live with slight variations, that's okay. The one spool be enough, I can see more requests/orders for an R2 unit coming your way.
You sound organised up there.

See, the best laid plans of mouse and man...
Enjoy yer out, and don't keep them waiting. You can have a lazy day another day.
Sithi
 

Bobby Mhor

Legendary Member
Location
Behind You
Owdo
Sun is shining here. Doesn't look as though there'll be be more rain today, during daylight hours. You as bad as the weather...
It won't be yer last last, I bet.
Sunny here at the Towers
Yer certain it's Tuesday, not Wednesday!
Is computer No.1, the one you recently cleaned the insides out on?
Hopefully you've lost no work.
I take it it was unable to find out what were wrong, so user intervention was the only option. Back to normality. Is that desirable...

Ah well, if you can live with slight variations, that's okay. The one spool be enough, I can see more requests/orders for an R2 unit coming your way.
You sound organised up there.

See, the best laid plans of mouse and man...
Enjoy yer out, and don't keep them waiting. You can have a lazy day another day.
Sithi

It's Sunday....
I cleaned out both that day plus did a partial reformat on computer 2 not that long ago.
I suppose a complete from the start one is preferable, next option..
a test TX on vhf earlier snagged a contact surprisingly, not that far away..
Been out and back again..
Off to get this back and running up to speed.
 

classic33

Leg End Member
Sunny here at the Towers
Which for a Bank Holiday weekend is odd.
It's Sunday....
I cleaned out both that day plus did a partial reformat on computer 2 not that long ago.
I suppose a complete from the start one is preferable, next option..
a test TX on vhf earlier snagged a contact surprisingly, not that far away..
Been out and back again..
Off to get this back and running up to speed.
Now yer certain on that, yer'd not be trying to trick me...
Number 2 having a partial reformat, and you doing nothing else but clean its insides out probably left it feeling left out. Leaving it no way of showing its displeasure other than reminding you who's in charge.
Complete reformat, make certain sure you've everything off before you start. Not that you need reminding...
Testing, testing, 1, 2, 3, and you got a contact. That's one for yer log. Why surprised that it wasn't far away?
Out, back, possibly out again. Yer gonna run into yerself coming the other way one day.
Break a leg...
 

Bobby Mhor

Legendary Member
Location
Behind You
Which for a Bank Holiday weekend is odd.

Now yer certain on that, yer'd not be trying to trick me...
Number 2 having a partial reformat, and you doing nothing else but clean its insides out probably left it feeling left out. Leaving it no way of showing its displeasure other than reminding you who's in charge.
Complete reformat, make certain sure you've everything off before you start. Not that you need reminding...
Testing, testing, 1, 2, 3, and you got a contact. That's one for yer log. Why surprised that it wasn't far away?
Out, back, possibly out again. Yer gonna run into yerself coming the other way one day.
Break a leg...

Dunno if it was a bank holiday here, mind you I was out early GC'ing..
Then a call from a nurse about my recent oops..
Cut the back grass, sprayed some weedkiller and stuck up some spiky plastic stuff to deter the birds.
A couple of voice contacts as well, quick over and outs. That'll do me.

I should do a fresh format but I'm lazy as it will take me ages to get up and running again,
I'll just install what I need as I go along, no rush.
Files all seem to be there, no doubt something won't, the main ones are in the cloud in case.
Logging all done, one print has 75 mins to go then I'll nip down and switch it off.
Pip'o'tootle
 

classic33

Leg End Member
Dunno if it was a bank holiday here, mind you I was out early GC'ing..
Then a call from a nurse about my recent oops..
Cut the back grass, sprayed some weedkiller and stuck up some spiky plastic stuff to deter the birds.
A couple of voice contacts as well, quick over and outs. That'll do me.

I should do a fresh format but I'm lazy as it will take me ages to get up and running again,
I'll just install what I need as I go along, no rush.
Files all seem to be there, no doubt something won't, the main ones are in the cloud in case.
Logging all done, one print has 75 mins to go then I'll nip down and switch it off.
Pip'o'tootle
Do Bank Holidays cease to exist when you go GC'ing!
Good news only I hope...
Not much done since you got back from GC'ing then. Does the anti bird strips yer putting in place seem to be working.
You seem to be getting a few more voice contacts these days, or didn't you mention them as much. Over n'Outs, do they count these days. What ever their speed.

If mine were playing up, I'd make certain I've everything important copied onto something else. Done it twice so far, but yours see more use than mine. Used to be every day, not as often these days.
There always seems to be one important file that's nigh on impossible find that gets left behind.
"Bob's Log" up to date?
Another R2 unit rolls off your assembly line?
Sithi
 

Bobby Mhor

Legendary Member
Location
Behind You
Do Bank Holidays cease to exist when you go GC'ing!
Good news only I hope...
Not much done since you got back from GC'ing then. Does the anti bird strips yer putting in place seem to be working.
You seem to be getting a few more voice contacts these days, or didn't you mention them as much. Over n'Outs, do they count these days. What ever their speed.

If mine were playing up, I'd make certain I've everything important copied onto something else. Done it twice so far, but yours see more use than mine. Used to be every day, not as often these days.
There always seems to be one important file that's nigh on impossible find that gets left behind.
"Bob's Log" up to date?
Another R2 unit rolls off your assembly line?
Sithi

Nah, sale on though at one chain..

Aye, spoke for 30 mins and pointers and advice received, may actually take a few on board.
Pleasant chat.

R2D"?
black parts this am, small part of print, once white appears later, I'll finish the print, may leave main body for overnight.
I've another thing to print so I'll do that whilst I'm waiting.

Bird strips, aye and no.
It's a two slatted fence, I've only put them on the slats I fitted on to the original one but bird mess seems down..

The problem is Windaes wants to instantly backup yer desktop and it clogs up Onedrive ..
It's a pain, I have to know basically have a look at everything, I may just dump it and use something else.
Logs okay:okay:
Awaiting the holy terror..

Oh, massive spider flushed last night
spideything.jpg
 

Bobby Mhor

Legendary Member
Location
Behind You
Owdo
Ho Di Ho...
Only a wittle, I'll be frank and say it means very little... Did you like it, that's the important part.
I'll try. You enjoy yer lazy day...

Owdo...
On the post as if you'd a jet engine attached..
Rain means some plants get fed at some point..
Gruel awaits before little one arrives to terrorize..
 

classic33

Leg End Member
Nah, sale on though at one chain..

Aye, spoke for 30 mins and pointers and advice received, may actually take a few on board.
Pleasant chat.

R2D"?
black parts this am, small part of print, once white appears later, I'll finish the print, may leave main body for overnight.
I've another thing to print so I'll do that whilst I'm waiting.

Bird strips, aye and no.
It's a two slatted fence, I've only put them on the slats I fitted on to the original one but bird mess seems down..

The problem is Windaes wants to instantly backup yer desktop and it clogs up Onedrive ..
It's a pain, I have to know basically have a look at everything, I may just dump it and use something else.
Logs okay:okay:
Awaiting the holy terror..

Oh, massive spider flushed last night
View attachment 820360
And a sale beats a Bank Holiday, hands down?

You'll get that look from them next time if you don't take any of it onboard...
Half an hour! Can I take it they were quiet.
On first name terms yet?
Dump windaes

Not quite ready to roll off yer production line.
Blue parts: done, Black parts: on the way, White parts: awaiting supplies. Red part(s)...
Death Star being worked on?

That's one problem with putting them in one place. They find another place to stand and watch you.
Try a plastic Woodpecker on the fence. Most other birds will stay away from them.

No choice given on where you back up to, before it begins. Very user friendly.
Windaes replacement!!
Is she there yet, shattering yer peace and quiet...

They're just trying to survive in a hostile world, too many folk trying to get rid of them by flushing them down the toilet...
I'd be careful the next time you go to sit on the toilet, he'll be back... bigger, stronger, faster...
 
Top Bottom