A brake question
- Thread starter ozboz
- Start date
Page may contain affiliate links. Please see terms for details.
Yellow Saddle
Guru
That little screw and the exact same one on the other side are used to position the pair of brake calipers so that you can centre the brakes over the wheel's centre line. You tune the position by screwing the one in and the other one out. They pretension a spring and the two arms them move left or right.
Yellow Saddle
Guru
And just to caution you, the screw head is so-called JIS (Japanese Industry Standard) which is not really compatible with the Philips screwdriver in your toolbox so the screw head strips very easily. I wish they would convert to DIN.
Illaveago
Guru
TV
It adjusts the amount of bias on the brake lever. It is there to allow you to centralise the brakes so that you don't have one side or the other binding.
Racing roadkill
Guru
Yes they do. A massive PITA, if you achieve it.
I prefer the adjuster screw on top of the calipers arrangement, that most modern road type rim brakes ( particularly Shimano )seem to come with now.
raleighnut
Legendary Member
The screw shouldn't be tight, it only adjusts the preload on a spring, if one of them is tight/towards the end of its travel then undo the one on the other side, that has the same effect.
