I've just come in from a reasonably long ride on my mtb and my neck is absolutely killing. Its an 18" frame and i'm 6ft2, so i've got my seatpost set to maximum height (it's a 350mm seatpost). When i ride my shoulders are in a sort of hunched position. Any ideas on what i could do to help alleviate this problem?
Avoidable aches?
- Thread starter j_whyte
- Start date
Page may contain affiliate links. Please see terms for details.
Dayvo
just passin' through
- Location
- 59° 50′ 5.55″ N, 10° 47′ 41.89″ E
Possibly have more of a bend in the elbows, giving you more of a relaxed and rounded back, instead of being straight and tense.
gaz
Cycle Camera TV
- Location
- South Croydon
frame is too small for you if you ask me, the handle bars will be low and thats why your getting a stiff neck. you could look into getting a riser for your handle bars.
Dayvo
just passin' through
- Location
- 59° 50′ 5.55″ N, 10° 47′ 41.89″ E
These sites might be of help:
http://www.coloradocyclist.com/BikeFit/index.cfm
http://sportsmedicine.about.com/cs/sport/a/bikefit.htm
http://www.coloradocyclist.com/BikeFit/index.cfm
http://sportsmedicine.about.com/cs/sport/a/bikefit.htm
Cockney Scot
New Member
- Location
- Hertfordshire
I am 6ft and went for an 18.5 in frame, only thing was the height of the bars. Solution was a stem raiser, cost me 320 at Evans, took me about 15 mins to fit (took my time to get bars straight) I now have a very comfortable upright riding position , done 15 miles on 1st part of my ride yesterday without stopping. Overalkl 50 pain free miles yesterday and same on saturday. Also fitted Ergon GP1 grips and adjusted brake levers and gear shifts down to avoid strain on wrists, now have a very comfortable bike.
The other bike is a hibrid 21in frame which I was told when I got it was the right size for me, but have always found the reach from the saddle to the bars a bit of a strain, hence why the smaller frame this time.
Stem riser was very easy to fit.
The other bike is a hibrid 21in frame which I was told when I got it was the right size for me, but have always found the reach from the saddle to the bars a bit of a strain, hence why the smaller frame this time.
Stem riser was very easy to fit.
nosherduke996
Well-Known Member
- Location
- Newdigate,surrey
Ialso have the same problem with mt road bike.After about 35miles it feels that someone is burning me between my shoulder blades
I read that as a rough guide you should deduct 13-15 inches from your inside leg measurement to get the size of MTB frame you need. Mine worked out as 17" - 19" frame, so I went for an 18" frame and that fits me fine. Maybe your frame is too small for you? When you stand over the top tube there should be 1-2" clearance between the tube and your crotch.
http://www.evanscycles.com/products/ritchey/adjustable-mtb-stem-ec011600?query=stem raiser
i think that 1 looks gd. i'll go into evans and see which size fits best then of course buy it online
i think that 1 looks gd. i'll go into evans and see which size fits best then of course buy it online
j_whyte said:http://www.evanscycles.com/products/ritchey/adjustable-mtb-stem-ec011600?query=stem raiser
i think that 1 looks gd. i'll go into evans and see which size fits best then of course buy it online
That looks ideal actually!
Mr Pig
New Member
- Location
- North Lanarkshire
I'm about 5'10'' and my MTB is 17.52''. It is about right off road but on the road it could do with being longer, I'd say your bike is too small.
