BB30 cup play specialized venge

[I like Skol]

THIS is fitted to my carbon bike and has been problem free. Bearings are an easy DIY job to replace if needed and the unit doesn't have to be removed from the frame when changing bearings.
It works with any standard Shimano HTII chainset.

 

[oscarplu]

Have you got a video? I cannot see it on my device. From the little I see from the photo the frame looks fine to me, do you still need a press to put the bearings in or do they just pop in by hand?

For some reason the video I have won't upload!! 😭

 

[oscarplu]

THIS is fitted to my carbon bike and has been problem free. Bearings are an easy DIY job to replace if needed and the unit doesn't have to be removed from the frame when changing bearings.
It works with any standard Shimano HTII chainset.

Thankyou😁

 

[oscarplu]

You could probably get away with one of these, https://www.merlincycles.com/token-...ing&utm_campaign=phg-GB&ucpo=64211&source=PHG

Thanks 😁

 

[oscarplu]

Thanks 😁

Have you got a video? I cannot see it on my device. From the little I see from the photo the frame looks fine to me, do you still need a press to put the bearings in or do they just pop in by hand?

Try this link for video

View: https://youtu.be/mGknqHyjzVE

 

[ozboz]

Try this link for video

View: https://youtu.be/mGknqHyjzVE

If I was you I’d send that vid to Hambini and tell him which frame it is ,he’ll put you right, there’s no charge for advice from what I can see , possibly a bit risky trying to get away with something , especially if you clock up a lot of miles ,

 

[oscarplu]

If I was you I’d send that vid to Hambini and tell him which frame it is ,he’ll put you right

I'll send it on to him. Just watched some of his videos, what a guy!! Brilliant

 

[fossyant]

The converters are the answer. BB30's a bad design and any press fit in a BB. Spesh has dropped pressfit from it's MTB's now.

 

[ozboz]

I'll send it on to him. Just watched some of his videos, what a guy!! Brilliant

top notch ! He engineers stuff to solve these problems to , he is on lock down do you will get a reply ,

 

[Ajax Bay]

2013 specialized venge, it has developed play in the bb Cup

https://www.hambini.com/specialized-osbb-engineering-guide/
The OP's problem is, I assess, that the orifices into which the (edited) BB30 bearings should pressfit (the BB shell) are either worn or outside friction-fit tolerance (ie too big) or both. So take care that any 'converters' are not relying on the holes being the correct diameter (for a friction fit) and or circular (as opposed to ovaloid).
Hambini (ensure volume is down at beginning of any video and have swearing tolerance threshold set high) gives significant insight into BB challenges (and sells top class replacements) eg this:

View: https://youtu.be/vrZ2wnS5X4s
He actually reckons pressfit is a better solution than screw-ins but with several caveats. As far as people 'calling him out' as @ozboz put it, go and enjoy (not) USanians on Slowtwitch - there is a long thread on why they don't like his forthright opinions on, in particular, the poor design of many makes of so-called aero wheels based on testing he did in 'his' (Eurofighter?) wind tunnel, but fail to use evidence-based science to counter his assessments (probably because they are marketeers (dimples on Zipp wheels anyone?) with weak scientific knowledge).
This article maybe a quicker read/scan: https://www.veloveritas.co.uk/2020/03/28/hambini-mar20/

 

[Milkfloat]

The bike in question is not BB30, I assume it is PF30. From the little I can see on the photo the frame itself does not damaged to the extent that the cups won‘t have at least some interference fit. What cups are you using the ones that came with the frame or the new PF30 ones?

 

[Ajax Bay]

From https://www.c-bear.com/en/blog/osbb-confusion-which-bottom-bracket-specialized-bike
Specialized ROAD carbon frame with virgin carbon 61x46 mm bottom bracket shell (non standard Pressfit 30).
Note: standard Pressfit30 (PF30) is 68x46 mm
The photo shows a virgin carbon 61x46 mm bottom bracket shell, and the orginal delrin bottom bracket supplied by Specialized.

OSBB 61x46 carbon Road frame with Specialized original delrin bottom bracket
Road Carbon Virgin = 61x46 mm (non-standard PF30)
HTH

 

[oscarplu]

Thanks for all the help guys. I'm the end I went for one of these and it's worked a treat.
https://www.sigmasports.com/item/Pr...s0QmI3lS-PEDOJRGRlYaAvdJEALw_wcB&gclsrc=aw.ds