martint235
Dog on a bike
- Location
- Welling
My 10 speed 105 cassette rattled a little bit so I went and got a spacer from the LBS. Fitted it ok but then the SRAM Red derailleur (which is meant to be compatible with 105) wouldn't shift properly to the 11t cog. I completely removed the limiter screw and reset the gears but it still wouldn't play.
So not sure what to do. I assumed (cos they were all I can see on t'interweb) that all spacers are 1mm, are they?
Is there a spacer that I could fit between the lock nut and the 11t cog as that would then not change the required reach of the derailleur whilst still holding the cassette firm?
Even though the cassette rattles, it still shifts ok so maybe I just need to live with the noise.
So not sure what to do. I assumed (cos they were all I can see on t'interweb) that all spacers are 1mm, are they?
Is there a spacer that I could fit between the lock nut and the 11t cog as that would then not change the required reach of the derailleur whilst still holding the cassette firm?
Even though the cassette rattles, it still shifts ok so maybe I just need to live with the noise.