Finishing cables..

Page may contain affiliate links. Please see terms for details.
I’ve found with crimp cable ends if you give the end a yank with a pair of needle nose pliers it’ll come off without any damage to the cables. Just pinch just below the start of the crimp.
 

roley poley

Veteran
Location
leeds
My front is not snipped to length but coiled about its self to keep it out the way ...keeping the length of a cable to fit the rear....blob of super glue ....never cap your cables too short you may find them useful :okay:
 

Cycleops

Legendary Member
Location
Accra, Ghana
This is what they do here, coil ‘em.

image.jpg
 

Randomnerd

Bimbleur
Location
North Yorkshire
Coiled. But which way? I prefer clockwise, but unfurl it all and coil counterclockwise every quarter, to prevent the wire getting too much memory.

Or...

I couldn't give a flying eff, because I just crimp and go?
 
Top Bottom