Thanks folks.
Even if wall-mounting is viable, to be honest I've gone right off the idea, given the potential for cock-ups and the need for removal / “making good” if I ever move out. While in principle this would be a cleaner solution, something freestanding would be easier to achieve, more flexible, potentially easier to achieve and reversible.. so I’m pretty resolute this is the direction I want to go.
Thanks to those who’ve actually suggested solutions – while none really stand out as ideal you’ve brought to my attention some options I’d not previously seen and it’s given me a few ideas.
I do note that they offer both the cylinder-mounted holders, as well as bolt-on wall mount alternatives separately - so I wonder if these could be added to a modified piece of furniture / a more aesthetically pleasing / functional wooden stand.... although of course that would rely on my pulling my finger out and designing / modifying something.
Even if wall-mounting is viable, to be honest I've gone right off the idea, given the potential for cock-ups and the need for removal / “making good” if I ever move out. While in principle this would be a cleaner solution, something freestanding would be easier to achieve, more flexible, potentially easier to achieve and reversible.. so I’m pretty resolute this is the direction I want to go.
Thanks to those who’ve actually suggested solutions – while none really stand out as ideal you’ve brought to my attention some options I’d not previously seen and it’s given me a few ideas.
Thanks - in practical terms looks like the least-worst avalable solution currently, although while it's not terrible I'm not overly keen on the aesthetic.I used one of these for a good while: Top Peak Two Up Stand
How low are your ceilings? Its quite tall so needs a bit of space.
I do note that they offer both the cylinder-mounted holders, as well as bolt-on wall mount alternatives separately - so I wonder if these could be added to a modified piece of furniture / a more aesthetically pleasing / functional wooden stand.... although of course that would rely on my pulling my finger out and designing / modifying something.
Cheers - like the look of that, however typically as you say it doesn't seem available any more. I do like the idea of the braced job, but none of those I'm seeing really look like anything I'd like in my living room..I use one of these, but probably purchased some 15 years ago, and it doesn't seem to be on sale anymore :-(
If you had another pair of hangers on the rear, you could potentially hang 4 bikes.
It's a Gearup Oakrak:
View attachment 793843
*There are two versions, the one like this which is completely free standing, and has the 4 feet at the bottom, and an almost identical looking one, that has a sprung part at the top, but no feet, with the idea being you brace it against a suitable joist.
I did look on ebay, and there a couple of the 'brace' ones on there, but none with the feet arrangement like above, though one may pop up I guess.
Cheers - unfortunately however I need the bikes to be flat against the wall so storage in that orientation isn't really viable..When I didnt want to drill into my last rented flat's walls I used three of these, I still use one in my new place.
View attachment 793865