well after much searching it would appear to get the freehub off the rear wheel you must first remove the nds bearing to get access to the lucknut sleeve . What a mighty PITA , not tried it yet as don't want to ruin the bearing trying to get it out first so will see if I can indentify the number first . Anyone done this before and can confirm my assumptions?
Freehub removal Fulcrum racing Sport 77 CX
- Thread starter MrGrumpy
- Start date
Page may contain affiliate links. Please see terms for details.
Scottish Scrutineer
Veteran
- Location
- Fife, Scotland
If it's the same as on the Fulcrum Red Power hub on one of my bikes, you need to remove the NDS bearing and use a long 11 or 12mm hex key from that side to engage the hex in the freehub. It then unscrewed fairly easily. I was carefull and reused the bearing.
Just revisiting this , as you said had to knock out the bearing and used. 12mm Allen key and a vice to unlock the freehub. I've cleaned it as best I can and soaked it in oil but it's buying me time, thought I could strip it down but seems to be user unfriendly ! So looks like a new one is needed, a tad spendy for cheap wheels !!
