Groupset advice

Page may contain affiliate links. Please see terms for details.
Hi all,
I'm in need of some advice. I'm in the process of fixing up my old hybridized Giant boulder 2007 which is slightly battered gearwise the rest is in near enough perfect nick. I really want to replace the bb/ crank, both derailleurs, cassette, and chain. Problem is I never quite wrapped my head around gearing other than some basic front derailleur adjustment.
Currently the bike has all 8sp components: altus rear mech, 050 sis front, Shimano altus 42/32/22 crankset, square taper bb, and I dont know what shimano cassette 8spd.

I want to replace it all with:
Shimano Alivio M412 Top Swing 7/8sp Front Mech £14.99


Shimano Alivio M410 7/8 Speed Rear Mech £18.99

Shimano Deore M590 Triple Chainset 175mm - 22.32.44t - 68/73mm - Black £49.99

SRAM PG850 8 Speed MTB Cassette Each - 11-32 £15.99

SRAM PC850 8 Speed Chain Each - 114 Links £8.99

Will all these work together? I think I saw on a chart somewhere the deore crankset was not 8spd compatible but have seen elsewhere that they are. Also as I don't have all the tools required for such a job so my friendly LBS owner said he would install any parts for quite a reasonable service charge.

Any advice from all you knowledgeable peoples would be greatly appreciated.



 

PpPete

Legendary Member
Location
Chandler's Ford
All looks ok to me.
 
OP
OP
B

Bailsofhay

Member
Hi PpPete,
Thanks for the response. I did a bit of a more in depth research/ window browsing online last night and came up with a full Deore 9spd system with shifters/brake combos for about £15 more so I went for it. I should get everything by tomorrow and fitted by the weekend ready for Monday morning or weather depending a fun ride on Sunday!
 
Top Bottom