How to clean your bike like a pro

Page may contain affiliate links. Please see terms for details.

screenman

Squire
This definitely works!
So does a jet wash.
 

fossyant

Ride It Like You Stole It!
So does a jet wash.

Doesn't remove all the dirt like a sponge does. Certainly doesn't from my car.

My jet wash is going no where near my bikes, absolutely no need. Taking a hammer to crack a nut. I only ever use a hose if the MTB is caked in mud, then I sponge it.
 

jay clock

Massive member
I must admit there are lots of people who get worked up about using pressure washer because of the threat of stripping bearings, but they are extremely directional. Very easy to avoid the risky areas
 

T.M.H.N.E.T

Rainbows aren't just for world champions
Like I'm going to listen to that rubbish magazine video... They took degreaser to the cassette and chain rinsed the bike and dried it before stating your ready to ride with no mention at all of lubing the chain.
Just not good enough or complete imho


Your favoured video just happened to include an S-Works? :laugh:
 

screenman

Squire
Doesn't remove all the dirt like a sponge does. Certainly doesn't from my car.

My jet wash is going no where near my bikes, absolutely no need. Taking a hammer to crack a nut. I only ever use a hose if the MTB is caked in mud, then I sponge it.
Fine, I rinse mine with the jet wash, this removes the majority of the grit, I also use a TFR, I then use a sponge and rinse again eith thr jet wash, and dry etc.

I have proper facilities at for washing of cars bikes etc. So no fathing about getting stuff out.

I am not saying your way is wrong and hopefully you use two buckets with grit guards.

There is more than one way to crack a nut.
 

fossyant

Ride It Like You Stole It!
It's also a pain in the ar$e getting the jet wash out, plugging it in, then putting it away.
 

screenman

Squire
It's also a pain in the ar$e getting the jet wash out, plugging it in, then putting it away.
Not with a set up like mine it is not.
 

ColinJ

Puzzle game procrastinator!
I have Crud Road Racers on my Basso and (as many people complain about) there isn't much clearance between them and they tyres so it is important to clean underneath them after mucky rides or they soon become horribly clogged. This is something you really need to use a hose pipe, pressure washer, or garden sprayer to do, otherwise you'd need to take the guards off every time - a sponge isn't going to help you on that job!
 
Like I'm going to listen to that rubbish magazine video... They took degreaser to the cassette and chain rinsed the bike and dried it before stating your ready to ride with no mention at all of lubing the chain.
Just not good enough or complete imho



Looks a good one.
 
I agree with what he said at 1:04. I once rode nearly 3 miles before realising I had forgot to put the rear one back on.
 
Top Bottom