In need of expert assistance please!

Page may contain affiliate links. Please see terms for details.

T4tomo

Legendary Member
My money is still on it just needs the wheel bearings replacing, which in all likelihood are sealed cartridge bearings, and the freehub body will be fine.
that's a job (replacing bearings) I use a my local mobile cycle mechanic for, I don't have the tools for removal and refitting, and its quite a specialist job that needs to be done right.

I fear the OP is going to buy parts (i.e freehub) they don't need /fit and still be no better off, potentially worse off by the end of this process. A chain whip and cassette tool are sensible purchases though, so all is not lost

Are bike servicing places open in Canada? - I'd take it there and get the bearings checked out / replaced.
 
  • Like
Reactions: C R
OP
OP
Ghost66x

Ghost66x

Regular
Location
Alberta, Canada
pics. i can not slide the axle out, waiting on my cone spanners to unlock those, 15mm and 19mm.

im so sorry guys i know literally nothing about this portion of my bike, so im learning with the help and guidance of everyone here.

i will mention again, taht when i roll the axle it almost feels like i can feel each bearing roll. im gonna measure those and just replace the bearings if they are not sealed. if they are sealed, ill get a bearing puller/press and take them out so they can be identified.
was able to remove the cassette with the fr5.2 and a leather gloved hand and some oomph.

as we can see from my photos, there are washers and nuts on the ends of the axle, i bought it used, it never came with a quick release mechanism on the rear wheel, the front wheel is QR.

i ordered these parts, should be here in a week or 2.

SRAM PG-850 cassette - new
SRAM PC-870 8 speed chain 114 link - new -

do i need to purchase rivets or a quick link? i also have a chain tool thing coming. el cheapo from walmart matching the chain size.
once everything shows up and before rebuild, it will be cleaned! and greased! and Lubed!

576947

576948

576949

576952

576953
 
Last edited:
OP
OP
Ghost66x

Ghost66x

Regular
Location
Alberta, Canada
ATTN THREAD

drive train has been upgraded
waiting on hub bearings, shop is gonna do those for me

bearings - sealed- srb 6001

North Shore Billet - Norco VPS 12mm Derailleur hanger
Box four 8 speed wide clutch rear derailleur
Box four 8 speed single click shifter
Sram 8spd chain
Sram 11-32t Cassette
Bontrager Comp series Shift cable and housing kit - white
Raceface -32t - narrow/wide 9/10/11spd chain ring

perfect 1x8 setup, zero issues, perfect shifting.

582722

582723

582724
 
  • Like
Reactions: C R
Top Bottom