Kona Project Two forks pre-1994

[rogerzilla]

Specifically: steerer length 183mm (it will normally be stamped as such on the steerer) and triple butted (steerer will be stamped CM /TB, often rather faintly). Axle-crown length will be 386mm if it's early 90s; slightly later ones were 410mm and then they got really long after that.

Threaded, obviously; Kona didn't use A-head until about 1996.

 

[GrumpyGregry]

Specifically: steerer length 183mm (it will normally be stamped as such on the steerer) and triple butted (steerer will be stamped CM /TB, often rather faintly). Axle-crown length will be 386mm if it's early 90s; slightly later ones were 410mm and then they got really long after that.

Threaded, obviously; Kona didn't use A-head until about 1996.

Will have a look in the shed tomorrow. Don't think they went to the charity shop...

 

[rogerzilla]

Will have a look in the shed tomorrow. Don't think they went to the charity shop...

If you could, that would be much appreciated.