I am not going to the shops.
I've tightened up the whirlygig. It was getting a tad slack..
Our laundry will now flap around evenly. ☀
I've tightened up the whirlygig. It was getting a tad slack..
Our laundry will now flap around evenly. ☀
Ahhh man, I broke the plastic pin in mine for locking it in place etc... and now it's staying up until I can fashion a new one.
Mr Amazon arrived this morning with my new cassette & cassette hold tool, no wonder the Aldi one broke I had to get a 18" breaker bar to undo the old one.
View attachment 530134
I'm not sure exactly how tight 4NM is but it certainly was a lot tighter than that I'm sure
Yes, should be 40Nm, or Shimano cassette says that. 4 is less than carbon seat post. Give a whole new meaning to the word, "spiining out" if only done to four!!!!Shouldn't a cassette be tightened to about 45Nm?
If so, I could report that when we moved into this house, the whirlygig was cemented into the ground!Are we in need of a domestic sub forum for all our bin news and washing line news?
Shouldn't a cassette be tightened to about 45Nm?
SO how tight is that, the one tht was on was TIGHT I had to grapple a few times before it releasedYes, should be 40Nm, or Shimano cassette says that. 4 is less than carbon seat post. Give a whole new meaning to the word, "spiining out" if only done to four!!!!
SO how tight is that, the one tht was on was TIGHT I had to grapple a few times before it released
You mean air the dirty laundry and dish the dirt, in public.Are we in need of a domestic sub forum for all our bin news and washing line news?
I am not going to the shops.
That's a coincidence, neither am I!!
Oh what a coincidence. Neither am I.![]()
Are we in need of a domestic sub forum for all our bin news and washing line news?