Newbie advice needed re Marzocchi forks

[ant_j]

I have the 44 TST2 Air forks (i think) on my bike.
My question is regarding the damping adjustment at bottom of fork.

Is this something I can do or will air leak out?

Sorry for this basic question - first MTB i own.

These are the forks
http://www.marzocchi.com/template/detailProdotti.asp?LN=UK&idC=1592&IdFolder=113&IdOggetto=56793

 

[Panter]

No, you'll be fine, twiddle away

The air is held in the top section under the top-up valve on the top of the fork.

 

[Steve Austin]

Twiddle the black knob on the bottom of the right leg will do it a bit, but you might have to get into adjusting the air pressure in them.

 

[ant_j]

Thanks for the responses.

How do I out air into the forks,
or is this something that just get done at service?

Thanks again

 

[Panter]

You need to get a special shock pump, unfortunately.

They're not overly cheap but you can get them on eBay.
With that, you add the air through a schrader valve on the top of the fork (check your manual or online for the correct pressure first)