On-One Inbred Build

Page may contain affiliate links. Please see terms for details.

HovR

Über Member
Location
Plymouth
Bought an Inbred frame a few months ago after advice from members on here, and I'm finally starting to build it up, so here are some pics!

Inbred.jpg IMG_20150128_143344.jpg

I was originally going to build it up with Rebas, but have decided to use a set of 100mm Epicons for now. Still a massive improvement over what I'm used to riding (~15 year old set of Rockshox Jett, elastomer forks). Might upgrade in the future, but I'm happy with these for now.

The bars are On-One's El-Guapo Ancho, nice and wide, on a On-One Ultralite 60mm stem. It all pivots nicely on an FSA Orbit MX headset. Bottom bracket is a HT2 XT unit.

More pictures to come as the build progresses!
 

dan_bo

How much does it cost to Oldham?
The inbred is a superb chassis.
20140119_120951.jpg
Done and does me proud many many times over.
 
OP
OP
HovR

HovR

Über Member
Location
Plymouth
Finally finished the build today! Full XT drive chain, minus the left hand shifter which is Deore. Thinking of trying out 1x10 with a narrow wide at some point so the shifter might not stick around.

Deore brakes with lifeline rotors are sharp with good modulation. The XT shifts flawlessly, and the clutch mech is great at eliminating chain slap.

Still need to play around with fork pressures and rebound but initial impressions are good! Also have the option of extending it to 120mm which I think I'll try out.

IMG_20150426_193616.jpg


IMG_20150426_193711.jpg


IMG_20150426_193725.jpg


IMG_20150426_193650.jpg
 
Top Bottom