I have managed to get a pedal stuck and when freeing it totally shredded the thread on pedal arm so a pedal aint going in no more. I was wondering what part I would need to order, likely cost etc. Thanks in advance.
I have managed to get a pedal stuck and when freeing it totally shredded the thread on pedal arm so a pedal aint going in no more. I was wondering what part I would need to order, likely cost etc. Thanks in advance.
IF drive side it will be a new crank usually as buying parts can cost more than whole thing, if it is non drive then most likely just the crank leg which is shimano 105 I think, should have a size written on it.
Who put the pedals on as that's where the damage was probably caused.
yes unfortunately its the drive side, so it looks like I will need Shimano 105 5750 Compact 10sp Chainset which is about £105, is this a difficult job how much will my lbs charge me? I fitted the pedal so its down to me.
yes unfortunately its the drive side, so it looks like I will need Shimano 105 5750 Compact 10sp Chainset which is about £105, is this a difficult job how much will my lbs charge me? I fitted the pedal so its down to me.
Can swap them over in about 5 mins but keep the chain rings of the old crank as you can use them again if they are not worn , you might be able just to buy the crank leg for that side as well , you can also get a tiagra crank for under £50 as well.
Ok its a relatively easy job so labour costs
Should not be too high. Will check out the tiagra it is alot cheaper. I have done a quick search for just the crank arm but cant seem to find it to buy on its own .
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
