biggs682
Touch it up and ride it
- Location
- Northamptonshire
Rescued this 48cm Peugeot Performance 5000 last weekend needs a bit of tlc as it hasnt been used for a few years , but ideal first bike for youngster or shorter adult . Reynolds 553 tubing Shimano Rsx sti's and shimano gs300 mechanisms14 speed .
48cm is measured from centre of crank to centre of seat pinch bolt and 52cm along top tube centre to centre and 78cm stand over , in picture seat post just about on max setting . 130mm rear spacing .
Rigida 700c shallow aero rims laced on to unknown hubs , rear needs a true for sure but rideable , tyres are useable but would recommend replacement before too long . Unbranded calipers that both seem to work although would recommend new cables and pads before using .
Itm alloy bars with black bar tape and 100 mm quill stem , 25.4mm seat post both are free to move and adjust ok .
Paint has a few marks but not found any dents or cracks yet .
I would suggest the following work is required , new fr mechanism gear cable , new brake cables and pads , headset inspection along with tyres and rear wheel needs trueing up and hubs could do with regreasing .
Please note rear sti unit wasnt working but with a new cable and loads of plusgas seems to be working just stiff so needs some freeing up .
Asking £65 for whole bike plus postage of £25.00 or can be collected from NN8 Postcode
Or would sell frameset incl headset and bottom bracket for £25 plus carriage
If not sold soon will be broken for spares
Please note pedals not included
48cm is measured from centre of crank to centre of seat pinch bolt and 52cm along top tube centre to centre and 78cm stand over , in picture seat post just about on max setting . 130mm rear spacing .
Rigida 700c shallow aero rims laced on to unknown hubs , rear needs a true for sure but rideable , tyres are useable but would recommend replacement before too long . Unbranded calipers that both seem to work although would recommend new cables and pads before using .
Itm alloy bars with black bar tape and 100 mm quill stem , 25.4mm seat post both are free to move and adjust ok .
Paint has a few marks but not found any dents or cracks yet .
I would suggest the following work is required , new fr mechanism gear cable , new brake cables and pads , headset inspection along with tyres and rear wheel needs trueing up and hubs could do with regreasing .
Please note rear sti unit wasnt working but with a new cable and loads of plusgas seems to be working just stiff so needs some freeing up .
Asking £65 for whole bike plus postage of £25.00 or can be collected from NN8 Postcode
Or would sell frameset incl headset and bottom bracket for £25 plus carriage
If not sold soon will be broken for spares
Please note pedals not included
Last edited:
