Project bike

Page may contain affiliate links. Please see terms for details.
OP
OP
Gringo

Gringo

Member
Its more of a hobby building custom bikes
This one I'm looking forward for the final test run
So far its getting there
 

Attachments

  • 20200402_185601.jpg
    20200402_185601.jpg
    43.5 KB · Views: 5
  • 20200402_185547.jpg
    20200402_185547.jpg
    62.6 KB · Views: 5
OP
OP
Gringo

Gringo

Member
You say you want performance, donā€™t quite know what you mean but if it means going faster you should be fine with a double something like 50/34. If you want an extra low gear you could put a 12/34 on the back.
If saving weight is important get a Hollowtech crankset instead of a square taper.
Performance and ride quality will be governed more by your wheel/tyre choice.
Good luck.
26" wheels type if tyre thinking nothing too fancy or expensive
 
OP
OP
Gringo

Gringo

Member
This one
 

Attachments

  • 20200402_193418.jpg
    20200402_193418.jpg
    74.4 KB · Views: 3
  • 20200402_193353.jpg
    20200402_193353.jpg
    97.9 KB · Views: 3
  • 20200402_193433.jpg
    20200402_193433.jpg
    83.9 KB · Views: 3
OP
OP
Gringo

Gringo

Member
Was thinking same thing
 

12boy

Guru
Location
Casper WY USA
Out of curiosity I once weighed a Campy Nouvo Record, an Avocet, a Sugino RD, a couple of cheap 130 BCD cranks and a one piece Brompton crank set. The only real weight variation was the Brompton which was a lot lighter. I would hope the first 3 would differ from the cheap ones in their strength and the toughness of the threads and square taper surfaces. I like your bike plain white. Simple and elegant. Just sayin.
 
Top Bottom