repair of the front pivot bearings

Page may contain affiliate links. Please see terms for details.

neuronetv

Regular
I have a claude butler MTB AL7005 alloy series, there is play in the front pivot bearings (steering colum). how does one dismantle this part of the bike? I've got as far as taking the kore stem off the top of the shaft but couldn't see where to go from there. thanks some pictures attached, for any advice.
 

Attachments

  • bike.jpg
    bike.jpg
    142.7 KB · Views: 7
  • sterring.jpg
    sterring.jpg
    22.2 KB · Views: 7
  • 20210901_172022.jpg
    20210901_172022.jpg
    90.1 KB · Views: 6

Ajax Bay

Guru
Location
East Devon
:welcome:
Dismantling: loosen the (Kore) stem from the steerer tube, Unscrew and remove the top cap and the steerer tube can be slid out (to the extent that the cables will allow).
There are headset bearings top and bottom of the headtube.
 
Top Bottom