exactly - with bikes folk can ensure that they can ride pretty much to the end of their days as long as they stick to simple stuff. Rapidfires up to 9 speed won't be a realistic problem either I feel.Hilights why the standard bike with gear cables and downtube or bar end shifters and stand alone brakes and spoked wheels is great. It’s simple enough that pretty much anyone can repair and replace parts on their bike. But mostly it just keeps working for decades other than worn out parts.
Sadly my friend, no. Ive never had to have one recelled, but they are out there.Thanks
for future reference do you know which ones have paid out the dosh??
Seems there are going to be exceptions, it does seem cars now use some sort of common computer connection and it no longer needs dealer only to reset engine management.
The whole reason why the Landrover was loved world wide was you could repair it. Not so today, it needs a computer plugging in to work out what has gone wrong.
Apparently the batteries can be replaced OK but if you do then the BMS will have bricked itself - or something like that.Bosch wont be using anything special re their batteries, just good quality branded Samsung/Panasonic/LG etc. Time spent researching, investing in a spot welder and a new pack of batteries will save you ££££s
Thats why I will never buy a Bosch ebike. I dont like being held to manufacturers for such relatively simple electronicsApparently the batteries can be replaced OK but if you do then the BMS will have bricked itself - or something like that.
Bosch say it is for safety reasons because things can go badly wrong if you don;t know what you are doing or make a mistake. Personally I think they should allow professionals to have the information to refurbish the batteries without triggering the electronics to brick themselves - but, of course, they have a profit incentive to keep such information to themselves.
I bought a Volvo specific one that does the engine but also covers transmission, ABS, stability system, aircon, multiplexed accessories, etc. It can also read, clear, initialise, program and calibrate new components and modules. It was £130, but has paid for itself 3 or 4 times over.Although on-board computers are a curse for all home mechanics, most car manufacturers adopted a standard plug system for fault code reading about 20 years ago. I have a cheapo (£50) pocket-sized plug in device for my modern(ish) Land Rover that lets me read the codes and work out what it thinks is wrong with it before I decide if I need to bother a garage. It also works on our even older VW.
Westwood rims are still available, as are the handlebars with the brake levers mounted. Even the brake levers are still available.Can you still buy handle bars with the bearing for the rod brakes? Can you still get the wheels even?
Interesting, so the government will need to allow quartz bulbs for lamps which can't take LED for 7 years after the lamps no longer made? It seems that's not the case, and quartz bulbs are being discontinued. So those with G9 bulbs have a problem.
Seems there are going to be exceptions, it does seem cars now use some sort of common computer connection and it no longer needs dealer only to reset engine management.
However with an e-bike I note mine I can alter to use twist grip control by pressing up/down buttons together and scrolling through the options, so I can make the e-bike illegal for UK use without need of a tool, not sure if this is really what should be allowed? I found out how to change from kph to mph, but so many other options.
What I want to try is how well will the walk assist work with the Bosch to allow motor to push one without peddling? Too steep here to really test it out, but once third party assess permitted then would be easy I suspect to alter so can ride without peddling. Mine already has that option, and it is so tempting to enable it.
Me too. Mine is a pretty comprehensive reader and will reset codes as well as do some useful functions like encoding new keys. It doesn't do the more complex and clever reprogramming and adjustments that a more expensive one would, but I tend to leave that kind of thing to the professionals.There are many aftermarket scan tools, the higher end just as comprehensive in functionality as the OE kit.
I have an USA import vehicle and it needed a code reset via Fords diag software.
I purchased a Chinese kit which did exactly the same job but for far far less.