Shimano fh 5800 hub

Page may contain affiliate links. Please see terms for details.

TAV

Guru
Location
mountainash
Hi I've just taken my hub apart to clean the bearings but now I can't tighten it back up. When I do start to tighten it up it gets to tight the cup goes into the plastic. Can anyone help the old cup and cone was easy you just put a spanner on the cup and tighten down on the lock in nut but this one has an Allen key on the end.
 

Attachments

  • 16031047088883751264688712838275.jpg
    16031047088883751264688712838275.jpg
    199.8 KB · Views: 4
  • 16031047373732855488109822995356.jpg
    16031047373732855488109822995356.jpg
    90.4 KB · Views: 4

iluvmybike

Über Member
This should help you - but if you have dismantled it too far, or from the wrong side you will have difficulty! https://si.shimano.com/api/publish/storage/pdf/en/dm/HB0003/DM-HB0003-06-ENG.pdf
 
OP
OP
TAV

TAV

Guru
Location
mountainash
Cheers for the link I've already seen that when I push the axle through and try to tighten up the nut it gets to tight and then it won't move freely.
 
OP
OP
TAV

TAV

Guru
Location
mountainash
Ok cheers looks like when I took the axle out I put it back the wrong way around. Idiot I'll take a photo next time cheers for the reply anyway.
 
Top Bottom