Show us your 1x Set-ups

Discussion in 'Photo Gallery' started by jowwy, 9 Nov 2017.

  1. OP
    OP
    jowwy

    jowwy The bearded Powerhouse

    Just finished rebuilding the Ti....for general road riding on rolling terrain

    Sram force crankset 42t chainring
    Sram etap wifli rear mech
    Sram 11/42 cassette
    Wolftooth roadlink

    Rolls in at 9kgs dead on

    20180217_144631.jpg
     
  2. ColinJ

    ColinJ A big clot!

    I like the look of it, but what does the derailleur look like when the chain is on the biggest sprocket?
     
  3. OP
    OP
    jowwy

    jowwy The bearded Powerhouse

    Plenty of slack still when it's in the big mate.......also still got plenty enough b screw adjustment available too. That's the good thing about the roadlink. I run it last year in the alps with a 46/34 front so knew it would work without any issues
     
    EddNog and ColinJ like this.
  4. stumpy66

    stumpy66 Über Member

    Location:
    Lanarkshire
    What rotors are using @jowwy, the standard trp ones? Any chance of a full pic to see it in all it,s ti loveliness
     
  5. OP
    OP
    jowwy

    jowwy The bearded Powerhouse

    Its not the best pic.........running swisstop rotors 160f and 140r

    20180217_140429.jpg
     
    Elysian_Roads and stumpy66 like this.
  6. EddNog

    EddNog Member

    Location:
    Cherry Hill, NJ
    Some better pics of my road bike setup:
    34iqpw3.jpg
    28u1cig.jpg
    2558ide.jpg
    rba695.jpg

    -Ed
     
  7. stumpy66

    stumpy66 Über Member

    Location:
    Lanarkshire
    Cheers, I’m not impressed by the Trp rotors and was looking for a decent alternative
     
  8. OP
    OP
    jowwy

    jowwy The bearded Powerhouse

    The swisstops do seem very very good and are slightly thicker than the trps
     
    stumpy66 likes this.
  9. OP
    OP
    jowwy

    jowwy The bearded Powerhouse

    Could the etap eagle be landing soon

    Screenshot_20180223-081833.png
     
    Elybazza61 likes this.
  10. SpokeyDokey

    SpokeyDokey 62 & 20% through Decade 7. Yikes! Moderator

    Not my bike (possibly will be) but these single ring set-ups seem to be gaining a lot of traction in the market. Been researching a number of bikes of this ilk - Cannondale Synapse SE Disc, Giant TCX Advanced SX and Whyte Wessex One

    Had a short ride on one of these a week or so back - with 44T + 10-42 which gives a pretty wide range. Having a longer test ride on Friday if the weather permits.

    First impressions, SRAM double-tap is really intuitive (have tried it before). One ring seems to be less of a faff than two. The big jumps (I guess 'big' is relative to what you are used to) in the cassette range occur in the steep-hill bail out gears and there is zero chain slap on rough roads due to the RD clutch mechanism. Will see how it works out with some hillier riding on Friday.

    Wessex-One.jpg
     
    jowwy likes this.
  11. ChrisEyles

    ChrisEyles Veteran

    Location:
    Devon
    I've always been curious about elliptical chain rings so when I needed to replace the chain rings on my full susser I decided to go 1x with an oval ring.

    It's a 1x8 with 32t on the front and 11-34 on the back. It's spot on for trail centres but in all honesty I wouldn't mind one lower gear for long Exmoor/Dartmoor hills. I personally find if I need any lower than that I'm probably at the point where I might as well walk in any case!

    20170327_111851.jpg
    The oval chainring makes a perceptible difference to pedalling feel, and seems to improve/even out the torque and traction when climbing a bit. The main bonus of the 1x set-up on the bike is the narrow wide chainring has reduced the number of dropped chains to pretty much zero.
     
    grecinos likes this.
  12. topcat1

    topcat1 vintage Mercian 2012

    Location:
    here
    Toying around with this 20180307_120852.jpg
    Xt8000 cass/chainset 105 for the rest with a Wolftooth road link
     
    Last edited: 7 Mar 2018
  13. tincaman

    tincaman Veteran

    img_20171110_110845_zpsgg3xgn8o-jpg.jpg

    This has been frame swapped to this:

    PlanetX%20RT58v2_zpscivphpwa.jpg

    Frame has clearance for 28mm tyres, rear wheel is just on for the turbo, front blue tyre is 28mm, just to see if it fits, brakes have been upgraded to 105 5800's, stem has been lengthened to 100mm, chainring is now a SRAM 42T X-Sync
     
    Last edited: 11 Mar 2018
    ChrisEyles likes this.
  14. fatjel

    fatjel Über Member

    Location:
    West Wales
    My Bacchetta has Shimano Zee 1x10 38t on the front and 11-36 cassette


    23232.jpg
     
    ChrisEyles likes this.
  15. tyred

    tyred Legendary Member

    Location:
    Ireland
    It's nothing new, here's one I prepared earlier, I replaced the original 46 tooth chainset with a 40 used with 14-24 Maillard block and Huret derailleur.
    viking2.jpg
     
    ChrisEyles and grecinos like this.
  1. This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
    By continuing to use this site, you are consenting to our use of cookies.
    Dismiss Notice