pepecat
Well-Known Member
- Location
- Dodging the Buzes in Brum
I have 700 x 25 tyres on my bike. Can i put 700 x 23 on? Does the 2mm make any / much difference?
You measure the distance between the two rim walls. from the interior.(scratches head)
Am confused. Read mr brown's article, and the one on measuring rim size but am none the wiser..... When he talks about measuring rim size, it's the diameter. But I know that already....
So. Question. Presumably I need to know the rim width, yes? And the way to do this would be to take the tyre and tube off so I have just the wheel. And then looking into the bit where the tube sits there's a channel (referred to as the rim channel by mr brown) and the two side 'walls'. Am I measuring the width of the channel, or the height of the 'walls'? Or neither? Or both?!
Ahhhhh..... just been into the garage and inspected the wheel - there is a little sticker on the outisde of the rim that gives the size - 622 (which is know is the 700 that we're all familiar with) x 15. So i'm good to go with 700 x 23 tyres then?
You will be fine with 23's on thatAhhhhh..... just been into the garage and inspected the wheel - there is a little sticker on the outisde of the rim that gives the size - 622 (which is know is the 700 that we're all familiar with) x 15. So i'm good to go with 700 x 23 tyres then?
ok, i'll admit i'm asking this cos i'm fed up with black tyres and want some bright red schwalbe ultremo zx ones..... but they only come in 700 x 23. So it's pretty much all cosmetic really....![]()