Easytigers
Guru
Ok...so I have a thread on here already about building a bike up from scratch...
I'm trying to make a list of everything I need...I'm not very organised so can someone have a quick look (also know that there will be lots of things that I haven't accounted for)
I have already got (or have sourced from friends):
Pinarello frame (2002 Galileo) Stem
Carbon fork Tyres+tubes
Shimano R500 wheels Front derailleur
Seat post Seat post clamp
Tiagra shifters Stem
Pedals
Things I need:
Saddle Rear derailleur
Cassette Front crankset
Chain Cables
Caliper brakes Brake pads
QR skewers Handlebars
Bar tape
I know that there are some glaring omissions...
Thanks for taking the time to look and your advice...I'm a bit out to sea that the moment!!!
Russ
I'm trying to make a list of everything I need...I'm not very organised so can someone have a quick look (also know that there will be lots of things that I haven't accounted for)
I have already got (or have sourced from friends):
Pinarello frame (2002 Galileo) Stem
Carbon fork Tyres+tubes
Shimano R500 wheels Front derailleur
Seat post Seat post clamp
Tiagra shifters Stem
Pedals
Things I need:
Saddle Rear derailleur
Cassette Front crankset
Chain Cables
Caliper brakes Brake pads
QR skewers Handlebars
Bar tape
I know that there are some glaring omissions...
Thanks for taking the time to look and your advice...I'm a bit out to sea that the moment!!!
Russ



I'm just embarking on build number 6, each one has been different for various reasons, but I agree with the comments made about being ready to change direction. I usually have cost as a major factor , but without wishing to compromise on quality. I go mid range, Deore, XT or there abouts and it amazing, with patience, what bargains can be found. The biggest 'mystery area' for me is the chain set and bottom bracket match. If the frame and or chainset have been acquired 2nd hand, there is often no info regards the spindle length of the bottom bracket required to give a good chain line. The only succesful method I know about is trial and error. I have also found the correct front fork for the build to be one of the more expensive items to source. There's always plenty of choice on the net, but when specific wheel size, steerer lenght,type, size and material are factored in, the choice soon reduces to just one or two options. Anyway, I wish you luck with yours, just popping a couple of parts on the frame can soon give you a very good idea of what you are going to end up with, so dont hold back, get stuck in lad.
Whatever you put together, you can always take apart again.