I need advice on the tools for this
And a spoke key to tighten it up (and true the wheel) - and the best is (note: check nipple width):You will need a Hyperglide cassette removal tool, a large spanner and a chainwhip to get the cassette off.
You've measured to the outside of the bend there, not the inside. That'll give you 2mm too long.I should have mentioned that the spoke kindly snapped at the connection to the hub - see pic. I don't know if I've measured from the correct side of the J.
Also I'm thinking of this set for the removal of the cassette.
View attachment 488156
That set you refer to is a freewheel remover - you need the cassette remover - the chain whip is for either but not that removerI should have mentioned that the spoke kindly snapped at the connection to the hub - see pic. I don't know if I've measured from the correct side of the J.
Also I'm thinking of this set for the removal of the cassette.
View attachment 488156
That set you refer to is a freewheel remover - you need the cassette remover - the chain whip is for either but not that remover
It claims: 'The socket fits all Shimano cassettes'.That set you refer to is a freewheel remover - you need the cassette remover - the chain whip is for either but not that remover
Got a set from Amazon - worked out well although I had to get a muscle man to move the wrench.