Crank arms with 15mm diamond taper and 170mm length

Page may contain affiliate links. Please see terms for details.

rmac1

New Member
Hello everybody,

Apologies if this isnt the correct forum to post this.

Looking for the right hand side crank arm (or both) for a indoor exercise spin bike.
Arm specs:
  • 170mm length
  • 15mm diamond taper

Heres an almost contender however the diamond taper is only 13.1mm:


View: https://www.amazon.co.uk/Bnineteenteam-Crank-Diamond-Square-Horizontal/dp/B07VCW5QJT/ref=pd_rhf_dp_p_img_5?_encoding=UTF8&psc=1


Any advise or where to look would be great, been looking for days without success.

Thanks in advanced
 

Sharky

Guru
Location
Kent
Check the dimensions.
The 15mm might be referring to the long diameter (corner to corner) and the 13mm, referring to the short diameter (side to side)?
 

rogerzilla

Legendary Member
JIS is 12.7mm at the short end. ISO is a bit smaller. You're unlikely to find anything else, although tolerances are notoriously sloppy for square taper.
 
OP
OP
R

rmac1

New Member
Hey guys,

Thanks for your input. Its defo wall to wall.
I bought this from Halfords and it didnt fit:

Image from iOS.jpg
Image from iOS (1).jpg


We can see wall to wall goes around 12 to 13mm, which by the majority of my searches its the standard.

It seems Argos with their Roger Black model didnt do it standard, when I measure the crank square its 15mm.

I am however hopeful after seeing this comment on one of the items in amazon:

2021-05-26_11h22_22.png


So it seems Wattbike might be similar.
 
Top Bottom