GuyBoden
Guru
- Location
- Warrington
I got a pair of inexpensive, but good DMR V6 pedals. They were a bit stiff due to having bushes not bearings, so I drilled a small hole in the side of the plastic axle. Then I pumped in some oil from a oil bottle until the oil leaked from the top and bottom of the axle. I then filled the holes with a blob of silicon.
I can easily remove the silicon and add more oil when needed or add a grub screw.
DMR V6 Pedals.
Oil bottle.
I can easily remove the silicon and add more oil when needed or add a grub screw.
DMR V6 Pedals.
Oil bottle.