FSA Cranks and BB

Page may contain affiliate links. Please see terms for details.

Jimmy Welch

Well-Known Member
Hi Guys I'm replacing the chainring ony pals Cannondale it's got FSA 46 chainring and self thingy crank pushers sorry picture attached , when I roved the crank there was 2 spacers on the non drive side one hard plastic and the other steel , the steel one seemed very out of shape , is is meant to be like that , or shall replace with nice round one
 

Attachments

  • IMG_20210914_113753MP.jpg
    IMG_20210914_113753MP.jpg
    94.5 KB · Views: 8
  • IMG_20210914_114918MP.jpg
    IMG_20210914_114918MP.jpg
    117.3 KB · Views: 9
  • IMG_20210914_120231MP.jpg
    IMG_20210914_120231MP.jpg
    99.7 KB · Views: 8
  • IMG_20210914_121010MP.jpg
    IMG_20210914_121010MP.jpg
    66 KB · Views: 8
  • IMG_20210914_121041MP.jpg
    IMG_20210914_121041MP.jpg
    75 KB · Views: 8
  • IMG_20210914_121054MP.jpg
    IMG_20210914_121054MP.jpg
    116.6 KB · Views: 7

cyberknight

As long as I breathe, I attack.
is it a press fit BB ?
some have a wavy pre load washer on the non drive side
1631646273936.png
 

si_c

Guru
Location
Wirral
Put it on the left side last before fitting the arm.

Consequence would be improperly pre-loaded bearings in the bottom bracket and the crankset would have left to right play - you'd definitely notice this when riding.
 
OP
OP
J

Jimmy Welch

Well-Known Member
Put it on the left side last before fitting the arm.

Consequence would be improperly pre-loaded bearings in the bottom bracket and the crankset would have left to right play - you'd definitely notice this when riding.
Cheers does it go on inside or outside the other ring that's on there
 
OP
OP
J

Jimmy Welch

Well-Known Member
Cheers does it go on inside or outside the other ring that's on there
Sorry ignor that just re read you message it goes on last
 
OP
OP
J

Jimmy Welch

Well-Known Member
One last question the wave washer is there particular way round it goes in , is there a front and back to it ?
 
Top Bottom