sir adrian dangerous
Über Member
My question is, can I just swap a 44t chainring for a 40t without having to change anything else except the chain length? I've currently got a 1x11 sram rival chain set.
Gong from a 44 to a 40 chainring
- Thread starter sir adrian dangerous
- Start date
-
- Tags
- chainring
Page may contain affiliate links. Please see terms for details.
Threevok
Growing old disgracefully
- Location
- South Wales
Providing It has the same BCD (Bolt circle diameter) then I don't see why not
I am constantly changing them on my Singlespeed
I am constantly changing them on my Singlespeed
OP
OP
sir adrian dangerous
Über Member
Thanks for the quick reply Threevok, I'll give it a go.
SkipdiverJohn
Deplorable Brexiteer
- Location
- London
Sounds like it could be one of those new-fangled MTB set ups.
Threevok
Growing old disgracefully
- Location
- South Wales
OP said it was a 1x11 sram rival chain set. - which a roadie setup I believe
As with an MTB 1x setup, there shouldn't be any ramps or pins on the chainring, but it doesn't need to be a Narrow-Wide chainring, or need a chain device, providing you use a rear mech with a clutch, which I believe the rival has.
As with an MTB 1x setup, there shouldn't be any ramps or pins on the chainring, but it doesn't need to be a Narrow-Wide chainring, or need a chain device, providing you use a rear mech with a clutch, which I believe the rival has.
