Rotor question

[mynydd]

Hi, I need to replace the front rotor on my canyon endurance. An annoying clink turned out to be a fault in the metal which I’ve ground down temporarily. But I can’t find a like for like replacement..... Will any similar one fit? Any suggestions for a reasonably priced one. I’ve not replaced one before. Thanks

 

[vickster]

What size it is?
What does the spec on the canyon site say for the bike?

 

[fossyant]

Any centre lock will do - that appears to be a 160mm - see print on the right hand 'spoke'. try and look for another Shimano ice tech rotor - should be similar.

 

[Cycleops]

And a Canyon too!!!!

Any centre lock of the correct diameter should do. Might not match the pattern on the rear of course.

 

[Sea of vapours]

That is an SM-RT99. Sigma Sports have them in 140mm and Merlin Cycles have them in 180mm. Since that's on the front, however, I suspect you need 160mm. Check on the disk, or measure it.
As above, any centrelock rotor of the correct diameter will be fine.

 

[si_c]

Any centrelock rotor of the correct diameter should be fine.

 

[figbat]

It’s marked as 160mm so, as said, a centre lock disc of 160mm. You’ll also need the correct splined tool to remove it.